im in the process of making a board track with a 3speed internal hub and i want to put a jockey shifter on it but dont know what route to take so please post any pics and how-tos
Hey, Ninja. You already asked me about mine, but I didn't give you a how to.
My cable broke, so I had to get a new one. I bought a regular shifter cable and put it through with the open end of the cable toward the shifter. I then made a bracket to mount the shifter and cable to the frame. I drilled a hole in the shifter base to clamp the cable to. The shifter holds it's position in the selected gear by pressure from a stiff spring. The spring has a bolt running through the middle of it and is what holds the shifter to the bracket. Hope this helps.