How not to ruin schwinn decals?

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Dec 8, 2007
Messages
5,432
Reaction score
15
Location
Marine City, Michigan
Rating - 100%
6   0   0
I want to use polishing compound on my schwinn, but i dont know if it will take the decals off it or not...
its this varsity:
camera-gate475.jpg
 
I use furniture polish, you know the stuff that smells lemony! Pledge. Works Awesome. Spray it on and use a soft towel, that will shine it up for sure!
 
okay....i dont know how the decals on the newer schwinns would hold up to rubbing compound but i did my sons 57 with rubbing compound,followed by glaze,and then a cleaner wax and had no problems with them being damaged at all.
i wouldnt use the clay compounds id try these...
https://www.autobodytoolmart.com/p-11299-13825.aspx
https://www.autobodytoolmart.com/p-15307-18984.aspx
then just a wax from any auto store(napa has the 3m compound and glaze for alot cheaper than the link i posted or maybe your dad has some around :wink: ) just be sure to test a small spot some where not to obvious first! and use flannel polishing rags to apply and wipe down
 

Latest posts

Back
Top