Columbia headbadge removal

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I just removed one on a similar bike. They'll press out with the right tool from the inside.

For me, the handle end of my Craftsman 1/2 in drive breaker bar was perfect.

Position the side of the handle near the end against the inside of the rivet. and use all the leverage of the bar to drive the rivet out from the inside.

Good luck!

--Rob
 
What he said ^

Use a hammer to tap on the pry bar.

Soak them with PB Blaster on the inside for awhile first.
 

Latest posts

Back
Top