Please can anyone help me with a 3d model of my sketch,i need at school and for a future project
i think it will run great, i hope, is just in the main step, the sketch, and i hope someone will help me with a 3d model or a better quality, i made this in paint .ratina said:I'm no expert, but how is it going to ride/steer with the headtube straight up and down like that? Its a cool design and I hope you can build it!
here is what i have in mind with the parts:Von Stans said:i wont be able to help you with a 3d rendering but throw out some dimensions like tire sizes and what you wanna build it out of cause its a cool looking design we might all be interested in building it after you trow one up on the board....
I think so :roll: , but I like it as it is, i hope i can make it in 3dHammond Eggz said:Very cool, original design, but as someone else mentioned, you're going to want some angle on that headtube/fork! :wink:
nosferatum15115 said:I think so :roll: , but I like it as it is, i hope i can make it in 3dHammond Eggz said:Very cool, original design, but as someone else mentioned, you're going to want some angle on that headtube/fork! :wink:
I am going to chime in with the rest of the gang on the head tube angle. In addition to being very twitchy to steer it will be much more prone to have some sort of structural failure. The suspension fork was not designed to run at 0 degree rake and will not work very well either.Boris said:nosferatum15115 said:I think so :roll: , but I like it as it is, i hope i can make it in 3dHammond Eggz said:Very cool, original design, but as someone else mentioned, you're going to want some angle on that headtube/fork! :wink:
I Hope so too! I loved motorcycle's with a very high headstock but there is a little geometry involved....its all to do with rake and trail here is an image to show how it should look.. from http://www.customchoppers.info
Get too tight a 'rake' or go into negative 'rake' and your cycle just will not handle!
i love your bike, i ve posted there and i liked in special the tubing.bighit said:this is close
viewtopic.php?f=6&t=22718
thanks for the effort , but...is too tallJLarkin said:
Enter your email address to join: