X-114 HEAVY SERVICE MOTOBIKE

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Re: X-114 HEAVY SERVICE MOTOBIKE (LEATHER TANK DONE)

nice biuld so far...

do you have a pic of the black bike in the last pic?

thanks
 
Re: X-114 HEAVY SERVICE MOTOBIKE (LEATHER TANK DONE)

Mugen_Stumpo said:
nice biuld so far...

do you have a pic of the black bike in the last pic?

thanks

Here you go. Its a kent which I made a headbadge for.

IMG00474-20120103-1530.jpg


I forgot to mentioned that I got the handlebar, stem and crank. Now all I need is the drop stand
 
After much thought I didn't see my self pedaling with 26 teeth in the front and 9 in the rear so I went with a new departure triplspeed conversion unit! :mrgreen:

IMG00477-20120104-0105.jpg
 
I need to get the frame stencils done this week. I need to get the whole bike done. I'm still waiting on a guy to send me a drop stand.
 
Thats a sweet frame, I just missed out on a steal, one just like it over in the sales forum for cheap. :cry:
 
KickBackCycles said:
How did you make them?
Is it like printing decals?

On pg.2 you can see that I first cut out a set in vinyl to test it out since stencils are made using a special material with less glue on the back side. When I do install them I might cut each one with scissor in 3 pieces so I can get that perfect positioning on the arrow on the side of the tube. I will take pictures so everybody can understand!
 
axsepul said:
KickBackCycles said:
How did you make them?
Is it like printing decals?

On pg.2 you can see that I first cut out a set in vinyl to test it out since stencils are made using a special material with less glue on the back side. When I do install them I might cut each one with scissor in 3 pieces so I can get that perfect positioning on the arrow on the side of the tube. I will take pictures so everybody can understand!

here it is. cut in 3 pieces

IMG00489-20120112-1040.jpg
 
now its been 5 days since i painted the frame the cream color.

things you will need

tape. i bought it in pepboys
IMG00500-20120112-1134.jpg

IMG00501-20120112-1134.jpg


paint of choice
IMG00499-20120112-1117-1.jpg



its a good idea to have an exacto knife handy
 
use the tape to cover the neck of the frame

IMG00497-20120112-1059.jpg


paint

IMG00498-20120112-1114.jpg


and the faster you remove the stencil the better

IMG00502-20120112-1134.jpg

IMG00503-20120112-1134.jpg

IMG00504-20120112-1135.jpg


if the paint has become to dry use the exacto knife to break the paint on the edges. basically cut the paint around the edges so when you remove the stencil it doesnt remove or lift the black paint specially in the small inside design. this is why its a good idea to wait a few days before paint coats. this way when you remove the stencil it will not lift the cream color or the paint it was covering. now the stencil do tend to leave a glue residue. wait a few days and light sand the area and then you are ready for some clear coat
 
Back
Top