SaltHammer Savannah Sand Flats Silver King (1935 Monark Silver King) - Aug01 FINISHED! What A Blast!

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I saw your bottom bracket and immediately thought of this:
View attachment 28708

Cool, it's some LYN. PD police id number. It had a Long Beach bike tag on it when I got it.
Big change over the past couple of days


index.php



index.php



20160710_131945.jpg
 
177j8b.gif
 
Did some more polishing tonight.
Got the cast headtube done.

20160712_192531.jpg

20160712_192551.jpg
20160712_192623.jpg



Just after I took the above pic, the frame fell over and I got some shiny new dings on the headtube from the asphalt. :mad:

20160712_192805_001.jpg



Oh well, I'll smooth them out a little on my final pass, but I'm not to worried. This frame has plenty of now polished scratches and nicks.

Here is the unpolished side of the fork.

20160712_195548.jpg


And the polished side

20160712_195526.jpg



20160712_195805.jpg
20160712_195835.jpg
 
Pretty sweet improvement on the front of the frame.

22848_948e43fd61ce8c36a2f582854d38d3b6.jpg
20160712_192551.jpg
 
20160709_144133.jpg
20160712_192805_001.jpg
 
I also painted a basic fender dart on my scrap test fender to get a feel for color.

20160712_172004.jpg
20160712_200147.jpg
 
How are you even typing? Your hands must be like vulture claws at this point, well worth it though, the frame looks awesome. All that tedium is paying off. Keep on rubbin' it's looking great.:thumbsup:

If he's not wearin' gloves his fingers are probably black but I'll bet he's havin' a ball. That looks like some fun polishing. Coming out sweet!

Triple dart on the triple duck?
 
Someone asked what my process has been for the cleaning / polishing. Nothing fancy, but here it is.

To start with I had to get the crud off. I'm not sure if it was an old varnish or some scaly corrosion. I had to go over all of the cast pieces inch by inch and scrape it all off. I did this with a dull 5in1 and a small utility knife.

I just made up the rest of the process based on what was close at hand.

First pass, cover area with a little rubbing compound. Start with 1000 grit wetsand using simple green sprayed on as the "wet" part. Cleaning it off every now and then, Then continuing with simple green wet sanding until I feel like I am down to a polishable level on the aluminum. I did this using small 1/2x2" strips of 100 grit sandpaper and my fingers.

Followed by red buff wheel on a drill, Applying red buffing compound block to padding now and then.

Followed by putting some MAAS polishing creme on the frame and using the buffing wheel on a drill again.

Followed by the MAAS again and a hand polish with a rag.

That's all I have done so far. I'll probably follow later with a buffing wheel and the white compound block and some more MAAS (both with the wheel and by hand)
 
Continued polishing tonight.

Got the fork finished.
20160714_191356.jpg
20160714_191405.jpg



Then time to get the tubes dones.


Downtube

20160714_194414.jpg
20160714_194438.jpg



Mid tube before

20160714_194446.jpg

20160714_194453.jpg



Mid tube polished

20160714_200356.jpg



And then the top tube. Only thing left is the seat tube.

20160714_203341.jpg
20160714_203346.jpg
20160714_203350.jpg

20160714_203357.jpg
20160714_203404.jpg
20160714_203440.jpg
20160714_203448.jpg
20160714_203454.jpg
20160714_203458.jpg
20160714_203502.jpg
20160714_203508.jpg



Then I risked life and limb to get a fireplace pic. This is the only time you will ever see a bike inside of Queenfish's house. If you guys stop hearing from me, drink a toast to me at my wake.

20160714_204012.jpg
 
HEY MAN! What about the insides of the stays and forks....

Merle. :crazy:

The casting surface on those spaces is much rougher than the rest of the bike. I don't believe they were ever polished.

Plus, since I am using the Mooneyes, those areas won't be seen.
 
So, knowing bare aluminum's propensity to 'gray over' or oxidize, how do you plan to keep / preserve the shine on the tubes / lugs?

Haven't decided on that yet. I was thinking of clear coating it, but I really hate to do that. I saw some stuff called ShineSeal, but it is freaking $60 for 4oz!!!!!!! I'll probably just wax it. Not sure how well that will hold up to our brutal humidity though.
 
Back
Top