- Joined
- Jun 30, 2011
- Messages
- 6
- Reaction score
- 0
first time making a trike and a motorized one at that.
I started out by making a base for the frame
then I welded the bike frame using turnbuckles to align it to the base
after welding everything
with mock up fork
Out on the streets after i welded swing arms to the base and put on the tires and the shafting
Dog wanted to ride the thing, at this stage i locked up the swing arms by welding so i can estimate the height of the springs
the engine im going to put in it
making sure everything fits
the jack shaft, Im using some left over 1 inch round shafting and pillow blocks for this
from behind
Im thinking of using a double chain system for more reliability
I started out by making a base for the frame
then I welded the bike frame using turnbuckles to align it to the base
after welding everything
with mock up fork
Out on the streets after i welded swing arms to the base and put on the tires and the shafting
Dog wanted to ride the thing, at this stage i locked up the swing arms by welding so i can estimate the height of the springs
the engine im going to put in it
making sure everything fits
the jack shaft, Im using some left over 1 inch round shafting and pillow blocks for this
from behind
Im thinking of using a double chain system for more reliability