(MBBO#05 Class1) 68 Vista Torino 500 (Everything is finished and as it should be!)

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
The front wheel shows a 1 of 68 date code and has a union hub. If anyone recognizes that stamp mark, please tell me who made these wheels.
a570258d51570f58bf0c378141e3562c.jpg
74563091850fb6af510e80d90b030ce0.jpg

The rear rim is stamped 4 of 67.


Sent from my iPad using Tapatalk
 
I also didn't like the WSW tire I bought for the front. I was looking at how it had much more white on the sidewall as opposed to the rear slick. So a reduction in white was in order as can be seen in this side by side before and after photo.
420f965a143759e948d156cacf227900.jpg



Sent from my iPad using Tapatalk
 
woaw that thing is looking good ! paint work is awesome:41: with the chrome crown on the fork its just:43:
 
Here it is out in the sun. Still need to have some decals made. I will have to wait a little because the decal man is working on another project.
57dcd11e33938674a807b1ed3e123edf.jpg
3778685107b1fd26e99db7497926691a.jpg
a5dd46ce4539b124103284c610226f61.jpg

I will be putting the reflector on the back as soon as I find it in all the stuff. I have never been able to find the correct black headbadge. But I am working on a solution. Also I'm not real happy with the original front fender. Just too much speckling. Going to check my fender stash.


Sent from my iPad using Tapatalk
 
Wow - looking great, love the color ( and agree, good work with rattle can paint ).
The rim looks like a Rigida/rigidea to me, quite possibly original,since Vista used varied off the shelf components. Still looking for a S2 Araya for mine.
Keep me in mind on the decal when ready ( although I need white, not black, if that is an option).
 
Wow - looking great, love the color ( and agree, good work with rattle can paint ).
The rim looks like a Rigida/rigidea to me, quite possibly original,since Vista used varied off the shelf components. Still looking for a S2 Araya for mine.
Keep me in mind on the decal when ready ( although I need white, not black, if that is an option).
Yes,the rims are original to the 68 Vista Colleen I parted out. I think you might be right about the origin being Rigida. I remembered seeing the little diamond somewhere before. How about a pic of your Vista? Not all models used Araya S2 rear wheel. Many 300 & 400 3 speed models used a complete Columbia wheel. But if you should happen to find a truckload of S2 rims, keep me in mind. Vista decals were white or black depending on paint color. Gold gets white.


Sent from my iPad using Tapatalk
 
I'm still stuck on the front fender. I have taken it off and am showing a side by side comparison with Sting-Ray counterpart. Very close match and better condition.
27e1415d58d607ae0a6712d55adc0439.jpg
f2864509ec2abbf0c7bb7e9b93520576.jpg

I have made a bracket that will allow me to mount the coaster brake fender to the caliper brake.
aaf3a0361f470ce651ff70c5ed756a63.jpg

Here it is mounted to the fender. Used a fender rivet instead of the pop rivet.
9c8e6011f0bcf4936634fdb63ca9c8d5.jpg

Here it is mounted on the bike.
8f0e7312685f93c5b45fb082a023604a.jpg

11d291e80970b7babd6095479b49ad12.jpg

Now if the sun comes out tomorrow I will take a full shot of the bike.


Sent from my iPad using Tapatalk
 
Yeah, Schwinn one looks good too.
Glad you like it. I'm waiting to see it in the light of day tomorrow!


Sent from my iPad using Tapatalk
 
Little overcast today but I could still take some pics with the updated fender on the front. Ok, now I'm happy with the fender. I also found the reflector in my parts stash.
edd80edde5ff7af4898e4ecae511d667.jpg

6908f0ada3695b6a489fe32aea835f8e.jpg
68dc1424d2161f0d76c501662388a89f.jpg



Sent from my iPad using Tapatalk
 
Yesterday I decided to try and use the original headbadge that came on the 68 Vista Colleen girls bike. It was in bad shape. Common problems that we've all seen before, bent, crinkled and faded or missing paint. Since the letters were not embossed, I flattened the bends out and made it a flat piece of aluminum again. I could barely make out the the lettering so I used a marker to show were they are so I could reference them later from a photo. A trip to Hobby Lobby for supplies got me the 1/8" masking tape and 1/4" stencils.
342937a12014387200735c202b903beb.jpg

Now to tape up the border so it will stay natural aluminum.
d5aa4e5ec40760c7e197aadf4b78431e.jpg

Then I sprayed it white and let dry for a day. Now today I taped off the edge to leave a white border and I put the letters in place.
10061cdf1d3b6da93d50d488e1f6fdda.jpg

I have now sprayed it black and will let it dry before removing the tape and stencils. I'm hoping I don't find any bleed through or that the tape and stencils don't remove the paint underneath. This little part required such tedious work I hope I don't have to take lacquer thinner to the whole thing a start over!


Sent from my iPad using Tapatalk
 
Well my worst fears came true. The face pulled the paint off. So I went back to the drawing board and started over by taping the boarder and painted the head badge black background first. I pulled the tape off right after I was done painting. Good, didn't pull any black off. This time I am using white pinstriping tape for the white boarder. Now I need to find small white letters to stick on. Hope it will work because I'm running out of ideas.
baa61cb93824637787627041cca79185.jpg
6390553730eef29f817e1b8eee028bfd.jpg



Sent from my iPad using Tapatalk
 

Latest posts

Back
Top