BO15 High Plains Drifter (The Finish Line)

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Beginning to have a lot less parts laying around. Greased and assembled all moving parts and bearings. Mounted the Springer form. Set the bar and seat height. Attached the Stewart Warner Speedo. Gettin there.
5A9E1B12-F684-4538-81F4-8FA9E303D3D0.jpeg
FC7C56E7-2A20-4CB7-9F8F-AB1222C14F75.jpeg
B1985C7C-21EA-46A3-9760-3272C5B29A2D.jpeg
E7ED3250-74B0-4ADF-845A-796657025CF4.jpeg
36BFFC49-E8E2-40E4-B0FC-34BD8938F606.jpeg
8CC61464-E7E8-4865-88A7-4BFC0BFCF447.jpeg
 
Every time I see the messy furple, I think of Guy Bonoeri.

1597892640611.png
 
I wanted to do something different and use a brake lever to ring a bell. I need to lube the brake line even though I am getting good return of the lever when released. I like symmetry, so I wanted to use both brake levers and I’m running just a rear brake. I drilled a hole in the thumb lever of the bell and ran the brake line through. I used a crimping nut to secure the line to the underneath side of the lever. Ring the final bell!
8B25AC55-F93D-4241-9798-BF050AC6F2BF.jpeg
0A606973-DAA4-4310-AA78-A05C5BE45C4D.jpeg
3EEF505C-5E7F-45B3-8DA0-5AF208B6984C.jpeg
 
Back
Top