ok - ive got a major problem - been re-doing a 1960 huffy belair - and the front forks were loose and when i tried to tighten them i noticed the top bearing nut, the one that had the cone on bottom for the bearing , was lopsided - so i disassembled the head tube, removed the bearings and on closer inspection the threads at the top of the tube are bent - ...? -no wonder that nut and stuff was terribly difficult to get off - i assume i will need to replace these forks now - bummer because wanted to keep them as they were original - is there any way to disassemble and keep forks and replace the tube only ???
-help please --
-help please --
![Picture366_zpsc067bd0d.jpg](https://proxy.imagearchive.com/148/14896e0497b8199b70fceb5367092c00.jpg)
![Picture368_zps7675c7cb.jpg](https://proxy.imagearchive.com/229/22934b742de1b2f2d8384e85b0b12fb9.jpg)
![Picture367_zps48498204.jpg](https://proxy.imagearchive.com/d62/d62618772649f8d723e3b1945752986a.jpg)