Headlight LED the easy way

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
From Newcastle upon Tyne, tried bulb in an old rear light but it needs a d cell battery so with some foil and the triple cell out my mini torch I managed to get it working, its .... bright, but as I don't want to use d cells, I just ordered these from china for pennies, converts aa batteries into a d cell holder so it will fit original light without any bodging up or slop - http://www.ebay.co.uk/itm/2-AA-to-D...194?pt=LH_DefaultDomain_3&hash=item20f2fe3fb2
 
Well that's good news! I was just curious as to what area you live in, I have been to the UK. I haven't been there since 1987, my Grandmother was from Ipswich, my aunt and uncle lived in Witham. I spent a whole month over there and Scotland.
 
I am about 40 ish miles from the scottish borders in a great party city but close to coast and countryside. Just had my first ever cruiser ride with others at the weekend as i have been a lone soldier championing the cause as i never see other cruiser bikes here but had some guys come up who have a club around 30 miles away as a meet and greet, lots of attention, great little ride so hopefully the numbers swell by time summer comes so i can get my own club started.
 
I am about 40 ish miles from the scottish borders in a great party city but close to coast and countryside. Just had my first ever cruiser ride with others at the weekend as i have been a lone soldier championing the cause as i never see other cruiser bikes here but had some guys come up who have a club around 30 miles away as a meet and greet, lots of attention, great little ride so hopefully the numbers swell by time summer comes so i can get my own club started.
My wife and I will be in Newcastle in two months. Going to bicycle Hadrian's Wall from the Irish Sea to Newcastle.
 
Cool you will like the nightlife, the River at night is fantastic, you will be riding through some of the best countryside ever and to top it off your close to the coast on the coast to coast cycle route, if you need any info on the area nearer the time give me a heads up and I will keep you informed of some great places to go to and places to avoid!
http://wikitravel.org/en/Newcastle_upon_Tyne
http://www.tripadvisor.co.uk/Touris...pon_Tyne_Tyne_and_Wear_England-Vacations.html
And our local bike central meeting place on the river
http://www.thecyclehub.org/
 
Cool you will like the nightlife, the River at night is fantastic, you will be riding through some of the best countryside ever and to top it off your close to the coast on the coast to coast cycle route, if you need any info on the area nearer the time give me a heads up and I will keep you informed of some great places to go to and places to avoid!
http://wikitravel.org/en/Newcastle_upon_Tyne
http://www.tripadvisor.co.uk/Touris...pon_Tyne_Tyne_and_Wear_England-Vacations.html
And our local bike central meeting place on the river
http://www.thecyclehub.org/
That's real generous, I'll take you up on that. We are spending 3 days in London, then the train to Norfolk for 7 days of hiking in Norfolk and Lincolnshire. Then on the train to Newcastle for the 4 day ride along the wall. Wish I could be there longer. Last time I was in the UK was in 1965 and I can't wait to see how things have changed. I was going to buy us bikes and just dump them but I found a place that rents them and will pick them up and return them as a part of the deal. They also booked us into bed and breakfast places in route so it will be a no brainer. In the 60s when I was there I bought a motorcycle and had to sell it in two days before leaving. That was the plan, just to dump it, but it was harder to do than I thought. I was trying to sell it for 30 cents on the dollar and got an offer for that and was ready to sell when someone offered me 60 cents on the dollar. It was a little hectic so I thought I would avoid having to give away two bikes and just rent. The motorcycle ended out being cheap transportation, even with the loss of money. Gasoline was high priced then compared to the States. Gas prices were real low here in January but have risen about 40 cents a gallon since then. I figured out the cost in British pounds with the then exchange rate for a liter of gas here in Michigan when it was low in January: 30 pence/liter. What do you pay now in the UK? The USA is now an inexpensive place (completely reversed since 1965 when the UK was a bargain). I only have one friend that makes a decent wage and a few are out of work which seems to be the new norm here so there isn't a lot of demand so things are here cheaper than in Europe. Now is a good time to visit us as far as cost.
 
My first ever cruise in Newcastle along the river Tyne last Saturday, just 6 of us and a short video by a guy who just happened to have a camera on his hybrid and kindly took some film and posted it online to preserve it as its the first ever cruiser bike cruise in my city, I am the one leading the pack on the black and red felt Red Baron. -

The guy riding the Ruff Porucho bike had just built it the day before, it was gorgeous, turns out he is a sergeant in the Police force so came in handy as he is part of the cruiser bike group from his area and just got back a stolen bike for one of the guys within hours of it going missing, handy to know!
 
Last edited:
Enjoyed the video! Thanks for posting and a thank you to Mr.P for that.:)
Spring has slight setback today here in Wisconsin - its snowing...
 
The hard way. Pint paint can, cut off top of a rattle can for a reflector, flashlight LED bulb cluster inserted into the rattle can reflector in a hole drilled with a hole saw, canning jar lid jammed into pint paint can to hold the rattle can reflector, jelly jar lens screwed into the jammed in lid, 1/2 inch electrical conduit for a stem clamp. Then soldering of the switch, battery pack and LED cluster. Home fabricated mounting strap reinforced to prevent bouncing with U channel. The pint paint can lid on the rear is pried off with a screwdriver to change the batteries.

 
The hard way. Pint paint can, cut off top of a rattle can for a reflector, flashlight LED bulb cluster inserted into the rattle can reflector in a hole drilled with a hole saw, canning jar lid jammed into pint paint can to hold the rattle can reflector, jelly jar lens screwed into the jammed in lid, 1/2 inch electrical conduit for a stem clamp. Then soldering of the switch, battery pack and LED cluster. Home fabricated mounting strap reinforced to prevent bouncing with U channel. The pint paint can lid on the rear is pried off with a screwdriver to change the batteries.


That is AMAZING-love it! :rockout:
 
It's pretty cool... but I think you need to ditch the LEDs and pry the lid off the back now and then to put fresh fireflies in it.
 
Go to [email protected] bought a lot of bulbs from them they even have super brite red led taillight bulbs .
they are in the UK. but there shipping rates are decent and the service is great .
They have bulbs for just about any bike light made .
I think they are the same guys as on ebay but I think this site has more Info.
 
I transplanted the guts of one of those very bright, Cree LED (1200 Lumens) lamps into an old Miller shell. It require a couple small solder joints, a switch, and some epoxy work, but nothing too difficult.

http://www.bikeshedva.blogspot.com/2014/06/retro-bicycle-led-headlight-construction.html

20140620_191237.jpg


20140620_191754.jpg


20140620_191803.jpg
 

Latest posts

Back
Top