Briggs 3hp , worksman , schwinn donor =BTR

[Boscrowe]

I got all of the necessary parts and bikes to start the initial build .
Today I started by buying some more parts and a couple bikes . Then I got home and started to chop and weld . I also found that the receiver hitch and my wifes 2" ball also came in very handy for bending some pipe . The base frame and many of the main parts are coming from a worksman that some one had hopes for a build but never put any time into . Now I know that some of my ways may not be very orthodox but I tend to trust my eye . So with that here it is .....

 

[Boscrowe]

 

[Boscrowe]

 

[wheelbender6]

It will be a beauty.

 

[Boscrowe]

 

[scrumblero]

I was all bummed seein the INB chopped up, but now I wanna see more!! 8)

 

[illMATTic]

Lookin real good. The lines on that frame are nice. I am about to start a build with the same bike.

 

[Boscrowe]

Today's progress , two different shifts today on the bike and second shift work resulted in a 1/4" cut in my finger with the grinder .blood shooting everywhere . With the stops on the fork it creates some clearance issues . I'll have to work on that for future .

 

[Boscrowe]

 

[Boscrowe]

This is the post I made from 1/2" black pipe needed a bit of grinding but will work out good so I can weld my neck on for handle bars

 

[Boscrowe]

 

[ifitsfreeitsforme]

your methods may not be orthodox, but I like them. Good stuff.