*BELLOWING YELLOW* IS DONE!!!!!

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Re: Let's Do This! ~SPEEDY~ *Front Fender 1.0

Man I wish I had more Raleigh fenders.....I could have both ends of the fender have the cool bullet chrome end.

And to think that bike shop I got these from..... out of there used parts pile.

Had three more sets of NOS Raleigh fenders even nicer then this pair :roll:

To bad they are long gone now....

I will flip them again and take a good pic ......
 
Re: Let's Do This! ~SPEEDY~ *Front Fender 1.0

Skipton said:
Man I wish I had more Raleigh fenders.....I could have both ends of the fender have the cool bullet chrome end.

And to think that bike shop I got these from..... out of there used parts pile.

Had three more sets of NOS Raleigh fenders even nicer then this pair :roll:

To bad they are long gone now....

I will flip them again and take a good pic ......

I have a set :D

bk2.jpg


bk1.jpg
 
Re: Let's Do This! ~SPEEDY~ *Front Fender 1.0

MplsCoaster said:
Radical fender! You definitively won't get splashed in the rain :lol:

Keep up the good work.

Thanks!
ratina said:
I have a set :D

:mrgreen:

Markm said:
I have a green set for you....

:mrgreen: Cool guys I will let you know if i need them

:D
slowerisbetter said:
I'm sooo doing this on a future ride... great look!

Thanks I sure am having fun with this one!
 
Re: Let's Do This! ~SPEEDY~ *Front Fender 1.0

Went over to Ratina's yesterday Great Guy with tons of parts!


Got this extra set of fenders. not sure yet if I will use them.... for sure using some of the hardware
RatRodBuildOff6002-6.jpg


How do you like them flipped?
RatRodBuildOff6004-6.jpg

RatRodBuildOff6003-6.jpg

RatRodBuildOff6007-3.jpg


There will be a visible seam like this. But it is a Rat :wink:
RatRodBuildOff6006-5.jpg


Just a idea where the light will go...
RatRodBuildOff6008-2.jpg

RatRodBuildOff6009-2.jpg

RatRodBuildOff6011-1.jpg


Light will bolt to the tab on the front fender....
Need to get working on this thing! time to bolt the fenders on!

More to come!
 
Re: Let's Do This! ~SPEEDY~ *Front Fender 1.0

These fenders are 'funky cool', I like 'em.

Bet they'll fill up with snow pretty quickly though! :mrgreen:

Maybe this will be your 'summer ride'. :wink:

Cheers,
Dr. T
 
Re: Let's Do This! ~SPEEDY~ *Front Fender 1.0

i agree with the front view1 IF Batman peddled a bicycle in the 30s the front of his bike would look like this.
In Ford model A black Of coarse!
I like it without the Light on the front. IT LOOKS MORE "Elegant", In a Manly way, like early Jaguars!
 
Re: Let's Do This! ~SPEEDY~ *Front Fender 1.0

Fenders looking great but I have to agree with imagearchy, not convinced with the light placement.
Maybe trying including it to the fender somehow would help, something like this:


Sorry, just my two cents :oops:
 
Re: Let's Do This! ~SPEEDY~ *Front Fender 1.0

Hey Skipton,

The fender looks good. I like the knob up front again.

Do you plan to support the light (other than the fender itself) down that low?

The alternative placement suggested might be interesting or an option if you can't keep the weight of the Down-Low Light stabile.
It's a differnt look though.

Another option maybe to use a rear fender-mounted taillight with a clear lens and LED swapped in. Lots of work though.

Are you going to match the Down-Low Light with the tank lights?

I like the snow plow idea :lol:

Keep up the good work!

MplsCoaster
 
Re: Let's Do This! ~SPEEDY~ *actual work done*

Thanks again for all the comments guys

I could not agree more about the headlight on the fender looks better with out it!

Got some actual work done yesterday.

The boys are out of school for the summer! So I have my best Fabricators on the job :D :shock: :mrgreen:

RatRodBuildOff6005-7.jpg


So they trimmed 3 or 4 inches off the "rear" fender and cut all the braces off.
RatRodBuildOff6008-3.jpg

RatRodBuildOff6007-4.jpg

RatRodBuildOff6009-3.jpg

Then we bolted it all together
RatRodBuildOff6006-6.jpg


This is going to work!
RatRodBuildOff6010-3.jpg

Hard to see in the photos... but using fender braces like these..
RatRodBuildOff6002-6.jpg

RatRodBuildOff6015.jpg


Still have to drill the holes for the front bracket. Put the bracket on the outside off fender to pull it close to the tire
RatRodBuildOff6012-2.jpg

RatRodBuildOff6010-3.jpg

RatRodBuildOff6014-1.jpg


This is the other set of raleigh fenders I got from Ratina
not sure yet but I may put them on the rear
RatRodBuildOff6001-6.jpg


more to come
 
Re: Let's Do This! ~SPEEDY~ *actual work done 6-24*

Boy is that COOL :shock:
 
Re: Let's Do This! ~SPEEDY~ *actual work done 6-24*

That's more than way cool..I'm definitely going to try that on a future build..Full loop fenders, yeah cool :)
 
Re: Let's Do This! ~SPEEDY~ *actual work done 6-24*

This is a neat build and totally in your character style. Keep it up.
 

Latest posts

Back
Top