☠☠️ ᗷᑌ丅丅ᗴᖇᗷᗩᒪᒪ ᗷᗩᑎᗪᎥ丅 3.0 ☠️☠

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
As I always tell my work buddies. I'll prefer 40C to 40F any day of the week.

Good Temps for curing paint for sure.

Paint looks good. Love the added art. 👍
I have been waiting until the evening when it drops to 35'c to paint. I have a cycle tour tomorrow in this heat. At least it will top at 35ish tomorrow with wind... So humid right now with grey skies from the fires.
 
Played with the pipe bender today, to get a nice shape on the arm
IMG_20230726_120310.jpg

Varnish is on and design.
received_949863049429638.jpeg

After work tomorrow it is putting it all back together.
Hopefully it will be easy peasy.
 
Part 2 of butterball is completed.
Used a old bit of aluminium sheet that was off my old Pajero. Shaped it for a bench.
IMG_20230728_183456.jpg

IMG_20230728_201351.jpg

Rack is on.
IMG_20230728_183515.jpg

And a old plate mounted.
IMG_20230728_201419.jpg

Started putting the bike together today. I have ordered a new short derailleur, so will take a few days to arrive. I thought I had one. The long one scrapes the rim. I will set it up as a single speed to finish it for the build off.
IMG_20230728_201527.jpg

Made some shims today. My bars are 22.2 mm and my stem is 36 something. So 3 of them later.
IMG_20230728_183506.jpg

I also need to go look for the bearing set. I thought I had that ready. guessing I will tax that from another bike.
I had 2 of these plastic lids.
Perfect for side panels.
IMG_20230728_183537.jpg


IMG_20230728_183540.jpg


IMG_20230728_201225.jpg

Plans are soldering and cutting stem down a little tomorrow and figure the front end and brakes.
I will be just sliding in on this build.😁
 
Love the red black and white colors I want to use it for a hot rod theme build with some old school flames.
Yeah, the combination is rat old skool. I have also ways wanted a hotrod style. Might be a bit too much here, for this island.
 
Looks great funky! good to have the heat back, without the fires would be better.
Be sure to load up and hydrate well for that event tomorrow!
Yes horrific what is going on with the fires here. Every year with the loss of lives. And all because of stupid people, wanting to cause chaos.
 
Last tough few days, but finished.
I don't like the bars so much, and I want a specific type of bar, but they are not in stock anywhere.
But I did get the size of the bars I want, and they came up short. So next week, I will weld my own up.
The style I am after, I will make the handles longer and also the length.
s-l1600 (1).jpg


Some shots.
IMG_20230730_070008.jpg


IMG_20230730_071735.jpg

IMG_20230730_070026.jpg

IMG_20230730_071727.jpg

Part 2 Butterball and how the name sort of came about.
IMG_20230730_070035.jpg

IMG_20230730_070041.jpg

The fiberglass carrier, was designed for the back of these 3 wheel scooters for delivery. This was found by a bin, and was stored for 15years.
I just passed one yesterday still in action.
IMG_20230730_094127.jpg

The trailer is very light, but with my camping stuff inside,it will roll like a dream.
The idea of the rack on top, was to place my boogie board, or a folding solar panel for a generator.
Means I can go anywhere,set up and charge the batteries either rolling or camped. And have a cuppa or coldy at the same time. The small bench in front, perfect for anything to sit on.

Now for the rest of the bike complete.
You have to go over into the finish section.

https://ratrodbikes.com/threads/☠☠️-ᗷᑌ丅丅ᗴᖇᗷᗩᒪᒪ-ᗷᗩᑎᗪᎥ丅-3-0-☠️☠.118787/
 
Last edited:

Latest posts

Back
Top