kite´s stainless steel cruiser

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Oct 4, 2011
Messages
11
Reaction score
1
Rating - 0%
0   0   0
Hi I'm new here and ask you first of all my bike in front.

I started like most with a sketch.
I brought this on paper then 1:1

5817453545_f33e245d91_z.jpg



Because not even the material for the frame was there, I started with a fork.

5793344145_d5f5951186_z.jpg


5793903640_8668d02555_z.jpg

Further, it is then left with the frame
The first tube bending and already put something together;)

5816048676_2a8a3b4f92_z.jpg

already seated and after a trial weld

5846483388_0fceaa82ab_z.jpg

After that I could make it the first time the wheels.
The rear part was the hardest to weld and has cost me any amount of sweat;)

5880478544_73a3ce912f_z.jpg

finished behind some

5893975026_6da013b853_z.jpg

Here the first picture after the weld
5908910583_5f54f22cea_z.jpg

at this time I could roll at least been


Days later.

Even in running, but no circuit

5926374025_e1b7845fa8_z.jpg


I had to build in a chain tensioner

5950753236_08a01d380f_z.jpg

because the chain-dragging on the frame



Last and finally got ready to drive
5961118825_ee624e335d_z.jpg



criticism or improvements .... I would be happy



greet kite


and sorry my english is not really good
 
First off, NICE BIKE, you have incredible talent! Second, NICE welding/fab table. Don't worry about your English, some of us rednecks can't speak it right either.
 
Great job,Sweet Ride,very creative and that fab table is nice!!!!! 8) :mrgreen:
 
speachless awsum job man :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen:
 
Hey thank you thank you


'm Just preparing my next project.
make everything better and less error.
was also my first bike and you never stop learning.

planned is a stretch cruiser with two wheel drive, 500w per wheel. So 1kw power under the ...
belt drive instead of chain.

The framework also V2a again. However, painted in red transparent;)




Thank you for the many positive reply



greet kite
 
hi kite
I love stainless steel
and it easy to work to special when you have the tools :mrgreen:
but to create the disgn :wink: theat its a cool bike man 8) i realy like it
 
The bike weighs 26 kg
The stainless steel is great for welding, but unfortunately totally warped.
so I had to edit the rear nearly a day long with the flame until it was centered again. ;)
 
Back
Top