the beginning of the build . It started as a Huffy womens saratoga 3 speed
tank template....this will become the hardest and most expensive project of the build.
motor mockup
hub sprocket from pirate cycles
Start of tank
tank was spot welded all seams filled with fiberglass cloth and two coats of fiberglass
one problem I had was the rear the forks were two close for tire clearance so I widened with a piece of wood and hand bent
them back
replacement brace for fender and rear fork support
seat support and fender mounts
sprocket for pedal chain tension but I hated everything about it
maybe next time
primer then wet sanded with 1000 grit paper
second of many coats of paint
few things to do like hook up light,change tank mounting bolts and perhaps add front disk brake and some pinstriping
Thanks for looking