Micargi Cyclone fatbike

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Nov 4, 2009
Messages
665
Reaction score
339
Location
CT Shoreline
Rating - 0%
0   0   0
Ebay has a Macargi stretch Fatbike frame for sale @ $169. Turns out to be the frame for an electric
bike priced @ $2500 ! Sorry no pics but somebody check this out to see if we can swap Dolomite
parts on to a Way Cooler frame. No doubt a heavier,longer,more cumbersome bike then we'd like,but
Way Cooler !!...Stevil:crazy:
 
s-l1600.jpg

edit...

I guess I should have added the link...
https://www.ebay.com/itm/26-x-4-0-F...189040?hash=item4d5ec101f0:g:SV0AAOSwcx5ZZpxH

I searched for 'Micargi stretch fat' on ebay to get this, and the electric and pedal versions show up as well...if you want to see what it looks like as a complete.

Jason
 
Last edited:
I considered buying a cool aluminum fat frame and transferring the parts from my fat Mongoose.
-I think you will need to use a triple tree fork with that Micargi frame. Most other parts should swap.
 
Another thing I noticed...the Micargi frame appears to require a solid rear axle. If your Dolemite has a skewer on the rear wheel, you may need to buy a solid axle.
-Also, I think the Dolemite has a bolt-on rear derailleur. The Micargi frame will require an axle mounted derailleur.
-Does the Micargi frame have a rear disk mount? if not, you will need an adaptor for your rear disk.
-You will need a longer chain, rear brake and shifter cable (unless you move the shifter to the top tube or seat tube, which I have done on some bikes).
-None of these things are a huge expense, especially if you get used parts. Its just good to know what is required up front.
-I have built several bikes from the frame up. There are always a few surprises and delays, but its the best way to have all the things you really want on a bike within your budget, IMHO.
 
I’m not sure the Micargi frame will take a rim over 80mm and the Mongoose hubs are really wide as well.
I was going to do the same with my TSP Oldster, but the ‘Beast’ parts wouldn’t fit the frame, I donated the Beast last Christmas to a church and bought a set of 80mm rims.

Many of the Macargi frames are limited to 3” (80mm) rim


Sent from my iPhone using Tapatalk
 
It has 80mm rims though, which narrows the 4” tire a bit


Sent from my iPhone using Tapatalk
I have 80 mm rims and 3.8 inch tires and they are very good for what I ride on. They work well in sand and well packed snow. For softer single track snow they are way too narrow. I'm thinking of actually going to 60 mm carbon tubeless rims as these would work well for my tire size and the type of riding I do. I would never ride in conditions that require 100 rims and 4.8 tires so I have backed down a bit and it works extremely well for what I ride on. I can ride in the summer on single track with this rig but I only use it as a guest bike as it is too heavy for me in the summer. As you can see by the picture the tire sidewall is not pulled in very much. I'm running 8 pounds of tire pressure in the picture. I'm taking a warm up break before I go back out to finish my ride and you can see there is 2 to 3 inches of loose snow over hard packed snow over ice so these tires and rims are perfect. You cannot ride a 2 inch tire in these conditions. If 4 inch tires fit with 80 mm rims it should be a cool bike and it should go over anything that you can pedal the Micargi through or over. You won't have to pick a spot or line, just aim and pedal. The bike will be heavy and a little cumbersome but the higher the pressure they easier fat tires are to steer, but then they don't go through soft stuff. Good luck with your build.
DSCN0280.JPG
 
Thanks for all this.
Gonna stick with my Dolomite as is
 
Back
Top