Recent content by jadewombat

OK, don't do what I did mounting the front wheels where they are above. They wind up being to close to the center (tipsy) and I wound up doing some adjustments to get them about 3/8" closer to the front. The pink paint looks like poop and I couldn't figure out why. I did three coats and the...

Punched a few speedholes in the brackets and got some welding done over the weekend

About 5-10 minutes a day being put in the wagon now. Drilled a hole in the center of the pull knob for this cool button thingy, found some Chicago-themed stickers at Michael's, stained the seat back a couple of times, and used some liquid nails to install the knob and button.

Slowly but surely. Put the luggage strap in across the rear and powder coat painted the pull handle. The pull handle is aluminum and didn't take the powder too well, but still somewhat textured and looks kinda cool.

Drilled the holes and mounted the seat today. Also picked out a leather belt to hold down the luggage area.

The wood for the seat I had to cut of course. I matched the curvature of the one corner with a cardboard template, filed the edges down, and cleaned up the whole thing to get it ready for dark wood staining.

My daughter suggested a seat, which will be for a stuffed animal of course. I have some sort of wood and cork cap for the pull knob also. I put it on the lathe to shave the writing off the end of it, then flipped it around and opened it up a hair so it fits on the pull handle shaft now.

I cut the aluminum pull handle and got out the bed liner for it. Will raid the steampunk bin of stuff next.

Hi, I've done almost a dozen radio flyers over the years and most of them have been here on RRB. It's been about two years since I did my last one, but we have a newest little member of the family--my nephew's girl. Time to do a mini-radio flyer again. I bought this one on the ebays for $10...

Nice. I picked up a cabinet from the 1960s recently, put wheels on the bottom, and hooked my decks. Gonna make an inner structure that lifts up with the lid. My daughter loves it so far, spinning vinyl and scratching most of all.

It took quite a few Sundays, but I made a new cabinet for components from a Pioneer T100 speaker (after all, the speaker is only as good as the enclosure). It sounds awesome. All beautiful hardwood, airtight, and really brings the room together as a center channel.

The smaller white wagon is from a previous build two years ago and being towed, I hope that doesn't count against me though. :grin:

My final shots

Finished up with all of the work on it. The last portion was getting the tow assembly for her other wagon welded and painted. Just need to add a sticker or two for her and I'll take some final pictures in daylight and post them.

I riveted the seat in place. This is the down position when it hangs upright from the wall. Just one part left to do and we're done.