CRASH

@kingfish254 I'll take some detailed pictures of them tonight for you. I forget the size off hand, but it's a bit Carriage bolt and the...

My turn to play in the Easy Off. Can was flat so had to puncture it with a screwdriver and dump it out. My tips. Warm weather.. Keep...

So the bigger button head on the sissy clamp is causing some interference issues with the caliper mount. So I cut and shaved it down...

Yes, I’m not planning on cutting welding. If I can just get a hot enough rosebud and push out a dimple a few more millimeters, I’ll be...

Be mindful of cutting and welding as well since you’re traditional at the moment

That had crossed my mind, but like you said, I’m trying to widen without compromising sprocket clearance. I think my little propane...

Def try and re seat that tire. Maybe a little dish soap and water and slowly massage it into place. Also letting that tire heat up in...

My first round of crimping wasn’t enough at the front of the chain stays. So i went another round. This round didn’t work. And I...

Because I’m using a beefed up sissy clamp that was originally used on Murrays, it has a mounting hole for a 3/8” bolt that threaded into...

Not me. The soon-to-be owner is a collector who commissioned this bike to compliment some of his show cars. He wants to debut it, along...

My dropout alignment tools are homemade. I think I got the idea from this site. I don’t have a frame alignment tool, but I’ve never...

I like that. I wonder if a hardware store carries black.

Black button head Allen bolt, I’ve used them in place of fender rivets and they visually almost disappear

Maybe I’m thinking too much into this. It seems like it’s a sure thing, but… When I take the wheel off, the caliper flops. Originally...

At first I was thinking of adding a welded tab to give it a cleaner installed look. But I think the caliper needs a good bit of...