ORBO Let's Go Ride Bikes

Shop deals on ebay
Advertise with us
BOXKARS
Bike Wall
Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Realized I have a cracked crossbar on the handlebars. Probably from one of the many jumps or wrecks I did as a early - mid teen.
20240217_090103.jpg

Got the polishing wheels and polished up some of the areas on the 4130 components.

Cable and.lick sat here often.
20240217_090123.jpg

20240217_090135.jpg
20240217_090139.jpg

Ready to assemble.
20240217_104015.jpg

20240217_104025.jpg

20240217_104038.jpg

20240217_104118.jpg

20240217_104134.jpg

20240217_104149.jpg


Partially Assembled.
20240217_111909.jpg

How do you lose a red seat??? Been looking for 30 minutes for it.

These AMI grips don't want to go on. Gonna need to file the burred ends on the handlebars and then the should go on.
20240217_122219.jpg

Stoppef for lunch. Gonna cut in the chain soon....
20240217_121623.jpg
 
Last edited:
metalchewy said:
Half way thru the wheels. Tore them down for regrease, and wanted to take care of the fade that they've done over time.
View attachment 258118
View attachment 258119
Plenty of good grease in there but what's to hurt with a scrub down and new grease.

When wet, they look close to what they looked new.

View attachment 258120
Scrubbed , cleaned and dried.
View attachment 258121
Enter WD40. Doesnt.work to release stuck on bolts, but when wiped on the old resin mags...
View attachment 258122
Will wipe the rest of the excess off tomorrow when I put them back together.
Click to expand...
Little late but blue polishing compound would get those wheels new
 
ingola said:
Little late but blue polishing compound would get those wheels new
Click to expand...
Never heard of the blue. Good to know. Polishing wheel would scare me a bit with these.

Unlike the mags in the store, these mags were never shiny, even new. They've absorbed grease before on the rear hub when overheated and it run down the spokes. That always left them as red as new. I knew wd40 would be similar amd not effect it too much. Had it not worked may have looked at dye or now the blue compound.
 
metalchewy said:
Never heard of the blue. Good to know. Polishing wheel would scare me a bit with these.

Unlike the mags in the store, these mags were never shiny, even new. They've absorbed grease before on the rear hub when overheated and it run down the spokes. That always left them as red as new. I knew wd40 would be similar amd not effect it too much. Had it not worked may have looked at dye or now the blue compound.
Click to expand...
I use the Dremel and go nice and slow even if it's not shiny it would get the deep red back
 
ifitsfreeitsforme said:
great looking bike!
Click to expand...
Thank You Ian!


I haven't done much on this except ride it around the house. Finished up the Darts disc brake conversion and brake line replacement last weekend.

Added mx bars to my BuildOff bike from last summer for the Wednesday ride downtown last night. I like it better like this...
20240306_201208.jpg

M Brittain rode his
20240306_201205.jpg

His brother rode 'that blue bike'
20240306_201217.jpg
 
Been a busy few weekend now that spring is here. Weeds and raking and general cleanup last weekend.

Found a few spots on the head tube this morning, still needing to be smoothed flat from a rock I ran into once. Plans this afternoon with friends. Will pull the polisher out sometime this evening and see if I can knock the edge down.

Couldn't find any cro mo mag decals in the last 10 years, so it will probably say cro mo free instead.

Hope to finish it be for the end of the month. OBC is the week after the end and want to ride it one of the days I'm at the event.

Hand is still weak on the wrist. Helped the neighbor pull a stump yesterday with the Hi Lift Jack and today swollen and painful from thumb to wrist, just like after the wednesday ride a couple weeks ago... Hopefully will be somewhat stronger soon..
 

Latest posts

Back
Top