The BIG-MX

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Nov 2, 2007
Messages
1,801
Reaction score
47
Location
Maineville, Ohio
My goal is to build a 26" BMX

Starting off with a nasty Jamis Taxi frame. It is a nice looptail cruiser frame. Not sure what color paint yet. I am debating on getting some anodized parts... not sure...

Anyway, here is what I am starting with.
5702377982_d7b0d4f637_b.jpg
5702380684_22fbe639d8_b.jpg


gonna lose the chainguard and grind off the tabs.

5702383184_e38afbbacb_b.jpg
5701818419_02586818f0_b.jpg


anybody have a spare top plate for an MX550?

5701805533_c5099cec86_b.jpg
 
Me too, I'll be following this for sure.
 
I have been checking out all the goodies at porkchop. I just can't decide which direction to go. I saw those tires, but I'm not really a fan of gumwalls, but the Comp3 tread copy is nice. I figured I would go with a newer style tire instead to give it a mix of old and new.
 
I made a little sideways progress on this one. I went on vacation to Virginia beach and I wanted a beater that I could ride on the boardwalk, but didn't have to worry too much about scratching the paint. So I built up this frame real quick to take. Very few of these parts will probably end up on the finished bike, but It sure was fun to ride.

5875388161_20326817bb_b.jpg

5875391477_0c7b788fb5_b.jpg

5875953356_26bebf3a03_b.jpg
 
i almost built a 26" BMX bike. your build makes me wish i could do mine!
 

Latest posts

Back
Top