Ratimus Prime * class II

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Dig the new look on Alien Fire. This bike is cool too. Always love looking at your bikes.
Thanks man. I pulled the banana seat off a while back. Cracked the bottom bracket too so I gotta get my welder out. But I love the way the ALiEN rides. The geometry is good it cruises nice and has 5 gears so it'll do hills and outrun dogs. I've been working on extra lighting for it, now it has the tube lighting in the rear wheel in red. I'm probably going to get a red tire and and LED valve stem for the front. It already has funky LED tail lighting and the plasma ball headlight. The Chicago TailDraggers do a winter Zoo ride and I'm hoping I'll have it rolling and lit up by then...my battery pack was in the headrest...

Carl.
 
Last edited:
Cut down the fork. Couldn't deal with the spacer on top. What to do with the hole? Solved with the classic solution.
f28510b654ce133e534da865769c47fd.jpg
561456729326efacff48871b243e973e.jpg


Carl.
 
That last pic, now I get it, underslung stem, never seen that before. Very Cool set up.
Where ya been brother, second time I've done it... Of course I just stole it off of the first bike I did it to...

Carl.
 
The underslung is rat-rodier'n all get out! Do you have a link to the build section where you fabbed this up, Carl? Must have been before my time....
 
Got a kick stand installed. I hate laying bikes down or flipping them over or leaning them on things...
06a1c1845c7ff3ace913f7c68e3f1993.jpg
0c2230b9fc176c5456e728858d2ba375.jpg
So when you build a one off with mismatched wheels and a highboy stance you need an axle mounted kicker.

Carl.
 
Cut down the fork. Couldn't deal with the spacer on top. What to do with the hole? Solved with the classic solution.
f28510b654ce133e534da865769c47fd.jpg


Carl.

I've welded a coin on top of the steer tube nut, but why haven't I ever thought to just put it inside!? Simple, and looks clean. I suspect I overthink things sometimes. Just because I can weld, doesn't mean it's always the best solution.
 
Got a kick stand installed. I hate laying bikes down or flipping them over or leaning them on things...
06a1c1845c7ff3ace913f7c68e3f1993.jpg
0c2230b9fc176c5456e728858d2ba375.jpg
So when you build a one off with mismatched wheels and a highboy stance you need an axle mounted kicker.

Carl.

Yup, I’ve got an axle mounted Jiffy that’s going on my never ending build......


Sent from my iPhone using Tapatalk
 
Halloween is an awesome time to find Rat bike parts.
KIMG1561.JPG
KIMG1562.JPG

what most folks see as a bottle stopper...
KIMG1563.JPG

I see as a quill topper.

I do like the coin in the hole but the old style glass formed into a skull is so cool. I'll try for better pics...

Carl.
 
The extra bit of frame welded on allows for a 26 inch back tire but still used the original brake bridge.
bb7c67cf7c27252d97ff96d8b8b93d86.jpg
85f1ca0f1cde4f18111e13bca46a18ae.jpg

I tapped the fender brackets on the rear dropouts 1/4-20 then used fender washers to hold the sissy bar in place. Ain't pretty but it is rat.
c30c3590e20bc3a1b6e5fa483b047ce9.jpg
d0b87e3e45fedefefd5fa5a28b9e4c10.jpg

So until and if I find a shifter, it's in third gear. But that's okay it's nice for cruisin'.

Carl.
 
Last edited:

Latest posts

Back
Top