Psychobilly Cadillac (BO16)

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
We all know that you don't need bikes for your build. Skilsaws and exercise equipment work just fine. :D

1620674703859.png
 
Have you picked something to start with yet?
 
I've made a slight change of plans, but I did make a little progress yesterday. It's hot, humid and I've been without AC for nearly a month so my motivation has been somewhat lacking. I had considered making a quadracycle, but tecnically a bicycle has to have two or three wheels in my state so now I'm making a trike. I figured the front end and steering is the hardest part so I'll start with that. The yolks for the spindles are 2" square tubing and the kingpins are 1/2 and ride on bronze bushings.

VtGfuoo.jpg


HCzDBJl.jpg

OxW8oIO.jpg


The ends are welded at 13 degrees, and ideally the whole axle will angle back at 12 degrees caster.

6SJKLlO.jpg
 
Last edited:
Looks like a normal SSG build so far!!! This should be fun!
 
Anything new been happening?
TicTocTicToc :D
 
1629723268120.png
 

Latest posts

Back
Top