Heavy Duti frame specs

[nm13]

I'm thinking about getting a Heavy Duti frame from ind-chuckz to build up a mid-fat klunker. Want to make sure I understand all the specs.

• Can use 1 1/8 threadless headset and fork
• Uses either an American bottom bracket or an adapter to take a 3 piece crankset
• Rear spacing is 110mm, requiring spreading to use a mtb rear hub
• Can fit a 26x3" tire

Anything else important to know?
Does anyone know what the geometry is on these? Top tube length, bottom bracket drop, fork length, head tube length etc.?
I'm new to these forums. Thanks ahead of time for any help you can offer.

 

[horsefarmer]

Can use 1 1/8 threadless headset and fork - yes

Uses either an American bottom bracket or an adapter to take a 3 piece crankset - yes

Rear spacing is 110mm, requiring spreading to use a mtb rear hub - not a problem.

Can fit a 26x3" tire - I used 26x2.20 Bontrager tires on mine and had room leftover.
http://ratrodbikes.com/forum/index.php?threads/orbo-heavy-duti-rocket-finished.97594/

Anything else important to know? - I'm sure.

Does anyone know what the geometry is on these? - http://ratrodbikes.com/forum/index.php?threads/klunkers-frame-selection.97745/