=D---- Laprise E-BTR

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Take 2 at making a fiberglass storage tank.
insulation foam
20106262_1074196499382225_2932548646962281831_n.jpg

spray adhesive and wrapped in cellophane,
reinforcement wood at the bottom and thicker ridges to stiff things up,
20108641_1074196466048895_8867666967901888444_n.jpg

2-3 layers on glass
fiber bondo
bondo
primer
much sanding in between each
20108235_1074196492715559_8167139588422593005_n.jpg

now that it looks so perfect , ill be cutting it in half , empty the foam , mount it and hinge one side
 
Nice job! How do you plan to access the storage? If it's hinged will the cut on the bottom need to be offset to allow it to swing open without the frame interfering?

TRM approved from one fiberglass tank builder to another!
 
Last edited:
Nice job! How do you plan to access the storage? If it's hinged will the cut on the bottom need to be offset to allow it to swing open without the frame interfering?

TRM approved from one fiberglass tank builder to another!
iam pretty much figuring it out as i go , ive cut the tank straight in the middle , i think ill mount the piano hinge so the pivot is below the bottom of the tank on the side of the lower tube, it should allow it to open 90* , ill probably use 1 or 2 cable as stoper and have no idea yet how ill make the latching , i know i might need 2 for strenght as it will most likely be used to cary a few beers and tools
 
Untitled.jpg
ordered 2 of those , locking and latching at the same time , perfect .. will probably just use a bolt on the bottom of the top tube to hook on it
 
tank split , foam removed , success this time !
icon_mrgreen.gif

20294047_1077692802365928_6011353900913885394_n.jpg


my innitial idea was to just trow the cycle analist in the box to not see it/affect the look ,but after thought i want ease acces to it and see how much juice i have left , so i thought of flush mounting it in the tank
20374532_1077692772365931_6139617070882927461_n.jpg

no risk , no reward , dremmel on the CA
icon_twisted.gif

20294009_1077692799032595_2468152592884118620_n.jpg

oh yeah!
20294105_1077692829032592_5077395849199521726_n.jpg

20229282_1077692845699257_9219017084087625784_n.jpg

20246310_1077692895699252_7405403989432879869_n.jpg

20246066_1077692879032587_2800918230188538681_n.jpg

20294303_1077692939032581_6991498643777336081_n.jpg

after epoxy resin everything , a small amount of bondo , sanding and primer
Boom! flush mounted CA
icon_cool.gif

20258177_1077692942365914_2875007856775242759_n.jpg

will make a sealed cover for the CA and all the wires
20264632_1077692992365909_5942713134216734370_n.jpg

also added the 3speed switch( removed from the handle bar clamp)
a electronic key lock and quick on-off switch ease of reach
20246522_1077693035699238_7800726577252035125_n.jpg

still waiting on my key lock latch i ordered to keep the hinged right half of the tank closed
(will take pics of how i mounted the tank halfs)
I also drilled the bars to pass the throttle cable trough it
20294359_1077693085699233_7025239220946004328_n.jpg

20246230_1077693019032573_6989019904988114856_n.jpg

also waiting on : drop stand -wide offset BB -bigger 40t sprocket - vintage pedals
 
Great use of the tank space! Looks great.

One suggestion though, I would consider having both switches the same and in symmetrical locations to the screen. Check google images for 'rocker switch' or 'billet rocker switch' for some cool ideas.
 
WOW!!!!
At first I wasn't feeling the tank when you had pics of it by itself. But not that I see it on, it is spot on for scale and style!!!
This build is amazing brother!
 
Great use of the tank space! Looks great.

One suggestion though, I would consider having both switches the same and in symmetrical locations to the screen. Check google images for 'rocker switch' or 'billet rocker switch' for some cool ideas.

i wish it was that easy , thing is the 3speed switch have special resistors in it , cant just use any other switch without being super knowlegable and meticulous .
since i wanted to tuck all the wires and electonics in the smallest pacage as possible i wanted to put both the key switch and 3sp swich in the nose of the tank , and there was not much options for disposition , had to clear the CA under and not be too close to the edge .
the other on/off switch is back cause it could not fit in front and had to be most accessible as possible and oriented (pulling it back=off) as its my emergency cut off that i removed from the handlebars for cleaner look , so i linned it up with the bottom of the screen like the 3sp .
i might recess the 3sp and paint it same collor.

had to make compromises for pacticality ,
tank storage space and safety
 
WOW!!!!
At first I wasn't feeling the tank when you had pics of it by itself. But not that I see it on, it is spot on for scale and style!!!
This build is amazing brother!
:)Thanks king , glad you like it , i do allot :D
 
This build is amazing. One question. I have a similar electric hub. Does the main body of the hub also spin when going inside the aluminum housing you made for it?
yes it does , its a front hub so it has a freewheel inside it so the motor reduction gears dont spin inside when coasting , the down side is the left chain always turns when rolling
 
here is the underside of the tank
i welded tabs for the fixed half (+3 on top)
and cut the piano hinge very close to the pivot and spot welded it to the frame
17634579_1080230642112144_8189579618718852893_n.jpg

and the underside of the bars where i drilled holes to hide the throttle cabble
20476142_1080230678778807_9060751789875208771_n.jpg

and the new 40t sproket
before
20476570_1080230568778818_8201843051939928408_n.jpg

after
20294518_1080230645445477_7890031316028961902_n.jpg

and some pics form when i test the torque with new sproket
that feeling of climbing a 30degre grass hill while sitting down relaxed barley pedaling is epic!
i still top 39kmh , but starts much faster
20429595_1080233058778569_1016164538944912754_n.jpg
19884374_1080233005445241_3459676287671409303_n.jpg
20376193_1080233002111908_8860539685949435668_n.jpg
 
Last edited:
i recieved and instaled the dropstand , its pure poop , not strong and make awfull squeeking noice when i ride ... ill have to make my own to be satisfied again :mad:
 
Picture heavy update :
Made a 2nd leather seat from a trike pan , much mor confortable !
Make a custom dropstand on wheels.
new sealed bb instaled , clearance is perf !!!
and 850km without issues :O
47 km my last trip on one charge , 42kmh max with this ratio :D

21054993_1102494856552389_1155688880984534167_o.jpg

21151202_1102494853219056_2315278266801708035_n.jpg

21078867_1102494916552383_3992566518992542545_n.jpg

21034693_1102494809885727_363136642422118250_n.jpg

21032505_1102494883219053_6737910104581357339_n.jpg

20993928_1102494936552381_7509810894504768131_n.jpg

21077675_1102495016552373_4282752909597498381_n.jpg
 
Thats pics from last weeks with the chineesium stand making tones of squeeking noise when rolling
21083061_1102519973216544_7281990555434216220_o.jpg

21032632_1102520049883203_2819015030428040084_n.jpg

21106382_1102520013216540_3516278260859030115_n.jpg
 

Latest posts

Back
Top