=D---- Laprise E-BTR

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Lowered the ration again ,28t/ 44t
i made a 44t with a old chainring welded to part of the 32t sprocket i tried first

now it goes ! , i felt like i was flying way to fast for the cycle paths around town and felt it was missing some power when pulling and starting up hills

heres few pics and videos with the previous 40t and finished tank i forgot to post


22289622_1123566984445176_8034757111840200469_o.jpg

22154386_1123569824444892_6406992084958584854_n.jpg

22195313_1123569801111561_756970519695474247_n.jpg

22221836_1123569744444900_3244886395337688609_n.jpg

22221879_1123569757778232_4303387558988101265_n.jpg

22196326_1123569774444897_6343844447850349783_n.jpg

22228466_1123569877778220_2493824438640224671_n.jpg

22221948_1123569901111551_2099271408114023636_n.jpg

22196125_1123569944444880_1429928188332148051_n.jpg
 
rebranded old aluminum badge :)
i embossed it with square and flat screwdrivers
22366327_1124842860984255_6601151664616086582_n.jpg

and official tank logo , the blue might be the same as the emblem
22279699_1125504944251380_2816772021992012864_n.jpg
 
Very cool! Great idea on the badge! The logo looks very period correct also! :cool2:

My 2 cents: I don't think the dark blue from the badge would work very good for the shadow. Of course it would depend on the color of the bike. If the bike is painted a light color like yellow, the tonal value of the dark blue and red are too close and would make the letters hard to read. I would suggest changing the color on the badge to the turquoise instead. Just my opinion, you obviously know what you're doing.:)
 
Very cool! Great idea on the badge! The logo looks very period correct also! :cool2:

My 2 cents: I don't think the dark blue from the badge would work very good for the shadow. Of course it would depend on the color of the bike. If the bike is painted a light color like yellow, the tonal value of the dark blue and red are too close and would make the letters hard to read. I would suggest changing the color on the badge to the turquoise instead. Just my opinion, you obviously know what you're doing.:)

i totally agree , thing is i only found dark blue for the vinyl :oops: . it does make it hard to read from a far
22424641_1125998800868661_6289306286078283312_o.jpg
22309028_1125998714202003_316649479716982773_n.jpg
:39:
ill try to find the right collor, or else ill have to paint it , witch is even more work than vinyl work , whats certain is i dont wanna pay 100+$ for a printed lazercut vinyl , was planing to do it my self
 
well here is dropstand v4 or 5?maybe?
maybe 7 with the failed attempts that were never finished :bigsmile:

this one is the strongest and most beautiful imo ,its a keeper:)
22366254_1125702254231649_2041084005191035774_n.jpg

22310308_1125702277564980_5964217673603016944_n.jpg
 
slowly dialing every details in prevision of paint

-made a bracket to hold the speed sensor on the fork
-made new nicer/stronger pvc,plastic,wood,handlebar cylinders/battery box
-replaced the 3speed switch by a turn knob ajuster
-a kind friend offered me to print vynils on his machine, so i should have that ready as well
icon_biggrin.gif


22519335_1130363237098884_539063661978424623_n.jpg

22528412_1130363213765553_8579376266522964768_n.jpg

22540215_1130363200432221_5701448245587977900_n.jpg

22549516_1130363260432215_5530645464187403479_n.jpg



the turn knob ajuster, only the handlebar mount was in stock , and happened to be cheaper as well , so i just hack it up and fiberbondoed it in there, works like a charm
icon_smile.gif



collor of the cylinder dosent quite match the aluminum , but ill see when aluminum is brushed or polished , i might just spray a shade of candy smoke paint on cylinders to match it
 
Nice ride 1HP! Electric powered bikes are really pretty functional machines, and these converted oldies are one-of-a-kind platforms for them. Good lookin bike. Getting there..
 
Nice ride 1HP! Electric powered bikes are really pretty functional machines, and these converted oldies are one-of-a-kind platforms for them. Good lookin bike. Getting there..
Thanks , converted ? mine was fully hand built from scrap , but yeah iam seeing more and more vintage moped being converted to electric witch in nice
 
I see , most of the tread pics were not showing up , at fist because of photobucket ,
and now cause it seems Fb linked image does not work after a while ..
trying to rebuild the thread by uploading dirrectly , not ease
 
Mine was fully hand built from scrap , but yeah iam seeing more and more vintage moped being converted to electric which in nice
My bad here. Most of your fab. pics were missing when I caught up with this electrified build. Your most recent frame/fork pics fooled me, even better. Yes, electric is here to stay. Lots of tanked bicycles could be converted. Interested in range as you get it together..
 
its already rolling since 1400+km , how its geared now (36kmh max) it has awesome torque and
i can do 25-30km on motor alone , or 40/45km with some pedaling . really depends on how i ride it..
btw iam still with the same chains , it still holding up to power and braking but i feel it starting to loosen up ,so 1 chain a year ,and oil every week is pretty much the only maintenance:113: its kmc z410 gold 1/2''- 1/8'' ,prooven good stuff
 
Printed vinyl 'faux tank' logo juste arrived from a kind annonimous friend, they look beautiful ! i just need to find a turquoise paint pen to make the emblem the perfect collor
1f60a.png
DSCN7716.JPG
 
Sorry i forgot to post the latest progress pics , but the good news is

IT FINISHED !!! :D

paint took 2-3 weeks, i used rostolium just cause it was the right yellow , but it took a week to cure before i could sand and do a second coat , the result should be more scratch proof than the usual thin layer of paint with 2-3 coat of clear .. 2 thick layers of paint

bare frame cleaned
DSCN7718.JPG
DSCN7719.JPG
DSCN7720.JPG

x-mas decorations drying :giggle:
DSCN7721.JPG

the trick to save time while still painting rims the right way
DSCN7725.JPG

paded fabric coated faux-tank interior and electronics cover
DSCN7731.JPG


And ... The dream ride :nod::cool2:
DSCN7734.JPG
DSCN7735.JPG
DSCN7736.JPG
DSCN7737.JPG
DSCN7738.JPG
DSCN7739.JPG
DSCN7740.JPG
DSCN7741.JPG

:rockout::113::banana::banana::banana::banana::banana::43:
wide view Ebtr 2.jpg
 
Last edited by a moderator:

Latest posts

Back
Top