B/MSR #305 / Finished at last (minuet that is)

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
This weekend was busy for both the bike build as well as other obligations

Started working on the headlight

decided to go with a more aerodynamic looking light and keep it stationary rather than being able to flip around
as well as possibly addition (if there is enough time)
36258124882_64eb1a37c7_b.jpg

using the reflector bracket to add to the stability
just needs a little modifying
35618771383_30f4e8b128_b.jpg

35618772363_ddcbefd7c1_b.jpg


Bolted up
36029752610_e37d5d5541_b.jpg



Also found the final puzzle piece
really wanted to have this part on the bike for the voting
so probably going to sacrifice some other stuff to get this done in time

found at swap meet
had the thin sheet metal (in black no less)
as well as the louvers
I think it used to be a case for an electronic device
36029754180_54c33dd098_b.jpg


cutting it up (template of final shape sitting to the left)
36029755850_77743cdfb2_b.jpg


right side piece
just need final trim then bolt together
36029757010_564bff9f75_b.jpg



Also I was able to paint and number the mini tank piece
Used nail polish to get that hand brushed lettering look
36029759720_6a4605daa8_b.jpg

still needs the back brackets attached

And if your wondering about the number
that is the state route # where the battle mountain race takes place

here it is on the bike with the new paint job
36029758390_01fe61b6bc_b.jpg



Should be able to mostly finish enough to get pics submitted by 7pm pst or 1 hour before deadline
(fingers crossed)
 
Last edited:
Here ate the side panels with louver inserts
ended up bolting them in since i had a lot of these little bolts left over from my Junk Crafted Higgins build
plus they kinda look like rivets
wish i had more to show but I was in such a rush the rest where a blur

36435954915_5e219e1211_b.jpg

36435954155_011d1a4cb5_b.jpg



There are a few minor things to do on it but had to make the deadline so this is as good as it gets right now

To see the finished bike go here

http://ratrodbikes.com/forum/index.php?threads/b-msr-305.104218/#post-1055866
 

Latest posts

Back
Top