Discussion in 'GAS POWERED BIKES' started by sdframe, Sep 5, 2018.
I think it's a Thunder Road, but not sure. Lotsa fun.
Looks like a wheelie machine!
Sometimes it felt like it when I accelerated and the front spring unloaded.
I bet that's fun to ride!
Where did you get the offset manifold? I tried putting a motor on my eliminator and I didn't have enough room to put the carb on.
Back in the good old days, we cut the manifold in two pieces and connected them with a short piece of heater hose from a car to make it flexible. You then had to secure the carb to seat tube somehow so that it wouldn't bounce around.
They're cheap and common on eBay. Measure the distance center to center of the mounting holes, they come in 32 and 40 mm sizes.
Ebay has them. I bought one for my bike , when I was still running the stock carb. If you run the Dellorto SHA 15 carb, you can get a CNC "shorty" intake.
(Short Offset stock carb)
(CNC short Intake for Dellorto/Runtong SHA Carb )
Note: Intakes designed for the Dellorto SHA will not fit with a stock (NT/Speed) carb!
Looks like it needs a banana seat too!
Separate names with a comma.