Unofficial March Shootout II

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
49681437591_e4a7366e0a_c.jpg


Done, calling her the One-Day-Wonder as she was done in a
day, bars, banana seat with sissy bar, front fender greased
the bearings and she's done. Nice to ride even without the
chain oiled, may add front brakes, see how I feel before the
deadline. Got the motor scooter done as well ready for road
worthy inspection and rego, this week.
wow, nice
 
85°F this afternoon so quit work about 4 pm and got the Monark out to play.
Had to break out the right angle grinder and do some trimming on the old gooseneck I'm using for a seat post. The mattress seat I bought for this bike wouldn't work with this post so I pulled the seat off the Crimson Haybailer and will put the mattress seat on it.
I remembered I had bought a red and chrome chain over the winter for this bike, and believe it or not I was able to lay my hand right on it today! So I swapped it for the one I put on it last summer. Also swapped out the pedals too.
Then I got into an inventive mood and thought I would try making a thumb lever for the shifter. Seems to work okay.
d0a301e107fcf84dff70ac7949da2455.jpg
131305c20dcf6fb03b1603fb8e0e00ad.jpg
58f0c955c969789e59fe6b2a7d954c70.jpg
c68e38898cc4596222b398c95bf31162.jpg


Sent from my Pixel 2 XL using Tapatalk
The seat post is a real high class rat maggot touch. Well done.
 
I won't finish 100% because the adaptor that goes from the theaded to unthreaded goose neck has some play in it. I don't want to tape the bars until I find a nice old upright and extended mountain bike stem. I'll be able to ride it but it won't be all the way finished. My SPD pedals also need some new parts
It’s sunny today after yesterday’s blizzard. Some progress on Frankengravel. Now I’m going out to see if I can find some bare melted pavement to ride Holey Spokes.View attachment 115373

and I have not ordered them. Here is the stem I'll have to eventually replace. I like the look, but it isn't stable. Also the green fenders in my previous post are a bust. They look good but I don't feel comfortable using them as the narrow spacing would allow rocks, mud or sticks to get jamed in there and cause a crash. The fenders are from 27 inch wheels so I figured the bigger diameter would give me enough room with the 700c wheels but the tires are a little too big.
15848051517952101621637.jpg
1584805202853-2066281214.jpg
1584805262273656004420.jpg
 
Screw it. I'm tired of waiting around for weather. The seatpost isn't going to get paint. Nobody is going to notice. Had a pile of parts, posted above after handyandy inspired me. Threw everything all together and wound up with this
IMG_20200321_124130408.jpg

Might be more in the future, details and such, but for now, it's a seat!
 
Holey Spokes and I took a 15 mile ride today. This is a perfect bike for wet freezing salty slop. Only problem I had was falling once when I didn’t get out of my clipless pedals on time and the brake cables occasionally freezing, but a little extra force on the levers is all it took for them to work.
20200321_163749.jpg
20200321_135318.jpg
20200321_135538.jpg
20200321_134830.jpg
20200321_134707.jpg
20200321_134156.jpg
20200321_155204.jpg
20200321_155302.jpg
20200321_155341.jpg
20200321_155310.jpg
 
Last edited:
Waffled on using the old clearance light for a taillight. Kinda too big. Then I misplaced it again! Dug around and found an old fender and the reflector was hanging on by a thread - Score! Just have to finalize mounting of chain guard. So temped to look for a larger chainring, but bike is comfortable now and I'm not sure how good it would be on even medium hills if it was taller geared.
IMG_2188.JPG
IMG_2183.JPG
IMG_2184.JPG
IMG_2185.JPG
IMG_2186.JPG

So unsure about paint. Like the original root beer brown metallic. It's probably too nice tho. Don't know if I should look for a matching spray bomb or leave the chain guard and fork to clash as is. Difficult to get stuff painted with weather so cold - some ice and snow yet.
Need rustfication advice. :forum:
 
I bet there's a car touch up spray bomb at a car parts store that would get you close enough. Then a little faux-tina to blend everything together if needed.

Sent from my Pixel 2 XL using Tapatalk
 
Waffled on using the old clearance light for a taillight. Kinda too big. Then I misplaced it again! Dug around and found an old fender and the reflector was hanging on by a thread - Score! Just have to finalize mounting of chain guard. So temped to look for a larger chainring, but bike is comfortable now and I'm not sure how good it would be on even medium hills if it was taller geared.
View attachment 115441 View attachment 115442 View attachment 115443 View attachment 115444 View attachment 115445
So unsure about paint. Like the original root beer brown metallic. It's probably too nice tho. Don't know if I should look for a matching spray bomb or leave the chain guard and fork to clash as is. Difficult to get stuff painted with weather so cold - some ice and snow yet.
Need rustfication advice. :forum:

Love that tail light. In the past I matched a chain guard color to a bike by buying a bunch of similar colors and white. I started with white. Then I used an under coat either lighter or darker than the original, depending what was available. Then a light coat of the closest color, letting some of the under color blend through. It takes time as each coat has to cure so it won’t lift. Had to keep blending spray bombs 3 times but in the end you couldn’t, tell. It helped that the top of the guard was black, thus keeping the frame and chain guard colors apart. Not fast enough for this month though.
 
Can you somehow fasten some Velcro straps on the cooler ?

I had to look hard to find them. I just ordered a package of two stretchy Velcro 27 inch tie down straps. The cooler is 24 inches around the narrow part. I tried one temporary strap and the ends of the cooler shifted. It will take two. The straps will take awhile to get here but the bike is done enough to use daily.
 

Latest posts

Back
Top