The frame looks solid but covered in red house paint applied with a brush uggh
Oh well, good thing I work as a spray technician and am able to lay down some flat black once its stripped. 
The fork was broke when I bought it. The break looked pretty clean and a welder buddy of mine fixed it up for me. Before:
Close up of the break together:
After my buddy welded it together and I sand blasted it at work:
Heres a shot of the front fender after some straightening and sandblasting:
Heres the mounting hole where the screw goes through into the bridge of the fork (it will need a little work
):
....
