Need ideas? Need advice? Give this forum a try.
what about the cutter shaft, can you post more picture on it??
X-RAY do you talk aboute my mini pool pump what I use for water cooling
I use the pump for the notcher and for drillind and milling machine
sorry but I dont understund what is a parts washer I m very bad in english
you can translate for me in pictures or drawing please.
hello honda you can go back to the pictures I have some there but if you want some details tell me what you want and I will took some pictures for you with wich details you wish to see take a picture of the shaft and draw in paint some arows with direction of the detail you want to see kindly Valy
some guys want to know what I use for polish aluminiun or steinless steel
here I have some tools what I use now for the moment
when I will have a garage I will build one automatic for polishing pipes in one go.
polish machine for cars with variable rotation
and a bosch grender
first time I use sand paper brush from 60,80,120 to take away the welding ecses
second time I use sand paper brush 120 and after 350
and the last I use the wool disk or textil material disk.with polish paste. red or brown is for steinless steel and wite paste for aluminium
here I have some picture with polish steps,
this cost 300 sw kr
after 120 sand paper brush
after 350 sand paper brush
after wool disk and paste
you can see more polishing work when I build the aluminium tork arm in a page 3 of this topic come more picture later
Heres some pictures of the parts i got done last friday and today...
Main cutter Block...
The back of the main cutter block...
Shaft Guide adapter block
Back of the shaft guide adapter...
Cutter Shaft Guide. I still need to ream this for the bearings... I could have left this as a rectangle but i wanted try some surface milling...
This is how i will attach the actual cutter guide block to the adapter, these are threaded holes...
Shaft guide and adapter bolted together...
All tree parts together...
Im still waiting on some parts... but I will update when I get some more parts done...
because I dont have a lathe [yet ] I have to build a tool to cut my drops off with my press drill
I will use lathe cutters but you can use and others
you can use one or 2 cutters in and out
next days I will show you guys how this cutter works
Users browsing this forum: No registered users and 1 guest