New School "moving to finished"

[Von Stans]

That is one sweet looking ride I am digging the handlebars and brake lever choice where did though unique bars from I have a build that would look great with a set of bars like that......

[bighit]

anyone see whats going on here?

[Houndog]

I sense something internally wrong.........

[kingfish254]

anyone see whats going on here?

Nothing shows for me.
If I follow your link it says
"Guests are not allowed to download attac"

[bighit]

sometimes tapatalk pics work for me and sometimes they dont.
In addition to an internal gear hub I am running the cables internally to clean this bike up.

so here is the hole plugged.


And wouldn't you know it I scratched the paint

[Green P1]

sometimes tapatalk pics work for me and sometimes they dont.
In addition to an internal gear hub I am running the cables internally to clean this bike up.

so here is the hole plugged.


And wouldn't you know it I scratched the paint

You gotta throw down a little electric tape on your frame before you drill on paint!

[bighit]

That was me tugging my rat tail file out too hard.

[ifitsfreeitsforme]

oh my gosh, this bike is so cool it makes me want to quit building mine. I give up.

[bighit]

I wouldn't do that. Push harder!

[bighit]

i am grinding away at the excess to get this cable to lay lower so it dosent rest on the axle spacer. even if it does the spacer dosent spin when its all snugged up, i hope.

[yoothgeye]

How about put some white lithium grease on the cable housing so that if it does spin it won't chew it up.

[bighit]

I got a new long cone shaped dremel bit today and I worked on it more. I got the chain stay ground down all the way and I am working on the down tube more. That Cable just wants to rest on the axle spacer. I thought about welding a ring in there to keep it down, but i held it down with my finger and that causes the brake to drag.

Also i have to get new housing so it may be more flexable. So I think I will grind it down as much as I can and let the chips fall where they may.

[Rockit!]

Maybe make a little "spring" that will hold it down?

[yoothgeye]

What if you welded a channel onto the spacer, like a cable guide, then the spacer wouldn't move for sure, and if it did it would just destroy the cable all at once and you'd immediately know if it was moving.

[kingfish254]

How about JB Weld a small nut on standing up on the bottom and then just use a tie wrap to pull it down.