a buCCR wrote:Were did the cap come from? I've seen that sand dollar pattern somewhere before. Like the valve cap too, looks like a survivor to me if he gets to stick around, you should give him a name
STREET SURVIVOR this flight didn't make itRe: STREET SURVIVOR time of my life
got the cap from , new member BAKEDGOODS who builds old school motorcycles ,they machined a bunch of these caps , i got this one because it was a little bit buggerd up on the top as you can see !! unperfect , is perfect for my bikes
a buLast edited by tin machine on Thu May 03, 2012 5:43 pm, edited 1 time in total.
...what a story a bicycle could tell ....
Re: STREET SURVIVOR Emory parts /jacksonville
picked up some emory parts , right off the mean streets of jacksonville , the front fork on the green emory may become the springer , probably use the fenders , may shorten them up some !! and might use the parson seat .
    ...what a story a bicycle could tell ....
Re: STREET SURVIVOR Emory parts /springer parts
springer parts ,fabed up some sleeves that slide in the spring , the truss rodes with slide into them . some lower swing arms , shooting from the hip on this springer may or may not work ?? springer is starting to come to me now this todays progress rubber gromets and correct hardware will be added to final EMORY parts springer .
       Last edited by tin machine on Sat May 05, 2012 10:36 am, edited 2 times in total.
...what a story a bicycle could tell ....
Re: STREET SURVIVOR Emory parts /springer parts
Homeade springer...Awesome, definetly a vote getter in my book!!!!!
Re: STREET SURVIVOR Emory parts /springer parts
Love these bikes and your LS theme. Maybe I will do a Molly Hatchet bike.
BO8 FireWing-Flexy-Fugsley-Beer Run * SALE ITEMS, FRESH FINDS + KINGFISH254 Stuff
MO FIRE MO WING .. just build a cool bike and have fun
Re: STREET SURVIVOR Emory parts /springer parts
Sleeves look good, still trying to imagine what you cooked up for the rest of the fork too !!!
Re: STREET SURVIVOR Emory parts /springer parts
Way to go Tin! Mmm springy.
Ride and Rat On
I Think Therefore- I Rat -Jake Sensi
Re: STREET SURVIVOR tank template/ more springer parts
progress on the tank , this is the template for the tank, finnal tank will be larger when fitted together , and will taper back to close to the frame in the back the large emory welds on the frame wont allow for a real tight fit but i think its is stiill going to look good ??
   ...what a story a bicycle could tell ....
Re: STREET SURVIVOR tank template/ more springer parts
with a tank that big, I would expect to be floating a bit. Should look fine in my opinion !!!
Re: STREET SURVIVOR tank template/ more springer parts
Thats coming along nice ! I spent alot of time in Orange Park! ( Buffalo's Blanding). I found a Publix themed Emory on C/L it sold fast it was the orange/pink and green colors like the stores .Its nice to see Emory getting a lift.nice Tom
Re: STREET SURVIVOR tank template/ more springer parts
Can't wait to see that fork.
.
Re: STREET SURVIVOR EMORY springer progress
added fork progress today . i like the idea of using as much of the emory bikes as possible all from jacksonville fl .
...what a story a bicycle could tell ....
Re: STREET SURVIVOR EMORY springer progress
That springer is interesting.
bikes...they make me smile
Re: STREET SURVIVOR EMORY springer progress
Shame to cover those cool twin bars with a tank, but I know you are going to pull it off!
BO8 FireWing-Flexy-Fugsley-Beer Run * SALE ITEMS, FRESH FINDS + KINGFISH254 Stuff
MO FIRE MO WING .. just build a cool bike and have fun
Re: STREET SURVIVOR EMORY springer progress
got the springer mocked up today , it kicked my butt today , i have got to fab a different bracket to hold the dual springs at the top thats were most of todays problems came in , and i have got to fine tune the spring action . i don't like the stem i am using that will change!!
   ...what a story a bicycle could tell ....
Who is onlineUsers browsing this forum: No registered users and 3 guests |
|
