"BOARD TO TEARS 2"

[Charles]

Looks like everyone has a board track build going on at one point in their cycling sojourn but me. The time is now for me to throw my vision to the track.

This will a cool build for me because the original track bike I had got repossessed by the owner. I had been storing it for a friend.
Looking at images online and here on the forum will give me all the ideas needed. Feedback a plus. Need a frame to start.

A 1941 CWC "tall tank" frame will do fine. The frame is a straight bar, drop stand compatible with a cool patina.
This frame is also in rms37's data base of "tall tank" CWC serial #. So far it's the earliest he's recorded produced in fall of 41'
That's just too right. A frame with a prominence before I've even begun. Def mad perfection! WAKE UP! ur "BOARD TO TEARS 2"

[Charles]

Board Tracker Racing
viewtopic.php?f=43&t=48163

[Charles]

Got the mock up finished.... boring

Using a fork from a 60's bike



I distressed the finish and will use my Darts. The wheelset looks to match good enough
Stem is from a Western Flyer BMXr with a steel gas line segment for bars.
Grips are from a old set of hedge shears
I had no badge for the cycle so I did what i could.
Seat was with another project. Found a new home here where it will be recovered again
The 45 degree lucky 7 put everything back out over tire
Bobbed fender from a Schwinn 27 inch

[Dr. Tankenstein]

Now, THAT is cool!

Dig the look on this one!

Cheers,
Dr. T

[NewOrleansFlyer]

Yup....me like

[Araya51]

NICE.!!!

[scott brownsey]

kool build i also like the goose neck

[jackdaw]

So cool! I love the bars, great matching patina. Cool stem and grips too. Sweet!

[g-ratter]

I like the way the head badge is flat and not curved along the tube. Now you just need to hand paint on the name.

[Charles]

Anyone is welcome to join in... unless ur name is Mary!
viewtopic.php?f=43&t=48163

[SCHWINNRAY69]

Very cool!

[jerrykr]

great looking so far Charles. too bad you don't have a CWC springer for it. but I like what you are doing.

[Charles]

great looking so far Charles. too bad you don't have a CWC springer for it. but I like what you are doing.

Phase 3 will be a mean fork
Phase 4 will be drop bars
Phase 5 will be tires or perhaps a tank. I dont know what the "tall tanks" look like yet?
Phase 6 will be paint or a motor

[pacman270]

I really dig the bike looks awesome

[deorman]

Which phases will be pedals, chain, and brake strap?