Ran into a problem last night... can't get my stem in the fork far enough. I noticed when I got the bike that the stem seemed like it was sticking up pretty high, but didn't think much of it. I have tried everything to figure out what is stopping the stem and can find nothing. I looked down it with a light and rubbed a long screwdriver in there to feel for anything and can't feel anything that should stop the stem, but anything very large stops at the same spot. I even tried to hammer an old seatpost into it, but it stopped at the same spot and is now stuck. I thought it might have been rust build up, but it won't budge.
A replacement is on the way... then prime and paint for the fork and back in business.
Also... my tires from Sulky seem to be taking FOREVER, but they pushed back delivery again.



