So its been a while since I did a proper build-thread. Taking in consideration the response I got on this one I thought there might be people here that would appreciate it too. So it is done already but I took some pictures along the way.
I hope you enjoy them.
The starting point was my Baron phase2 bike (phase2 because it started out with a different fork and set of black Boa-G's).
A picture of the trike axle as I got it, it is a one off build designed to work without any support-struts.
I didn't use the casing because it did fit the axle anymore since the design was done with a Basman in mind, the axle in that design, was positioned between the stays before the hub.
Relaced some wider rims on it (26" X 80mm).
Tires.
Colour.
Replaced the old roller-brake for a newer type.
Kahaki logo on.
And some pictures from when its done at "Pietersen US Cars & Bikes" event "Roll & Rock".
I hope you enjoy them.
The starting point was my Baron phase2 bike (phase2 because it started out with a different fork and set of black Boa-G's).
A picture of the trike axle as I got it, it is a one off build designed to work without any support-struts.
I didn't use the casing because it did fit the axle anymore since the design was done with a Basman in mind, the axle in that design, was positioned between the stays before the hub.
Relaced some wider rims on it (26" X 80mm).
Tires.
Colour.
Replaced the old roller-brake for a newer type.
Kahaki logo on.
And some pictures from when its done at "Pietersen US Cars & Bikes" event "Roll & Rock".
