RRBBO13 RATLINER ( tail lights, more sprockets, titanium and she is done)

Discussion in 'BUILD OFF 13 BUILD JOURNALS' started by karfer67, May 8, 2018.

  1. karfer67

    karfer67

    Joined:
    Nov 30, 2006
    Messages:
    6,200
    Location:
    sacramento, ca
    Oh I almost forgot to thank college cyclery for their help with the odd parts I didn't have for this build. If any of you travel through Sacramento I highly suggest stopping by. It's sacramento's oldest bike shop and is full of awesomeness. [​IMG]

    Sent from my SM-J727P using Tapatalk
     
  2. Blackout

    Blackout

    Joined:
    Jul 28, 2013
    Messages:
    334
    Location:
    Holland Mi
    Cool Cool Bike!! gotta ask what bender/roller/mandrel bender are you using?? I have been looking to buy something for tighter bends. You can convo me also Thanks !
     
  3. karfer67

    karfer67

    Joined:
    Nov 30, 2006
    Messages:
    6,200
    Location:
    sacramento, ca
    I use a jd2 model 4 air hydraulic bender. Fair warning with the pump and a few dies it cost over 2k. Manual benders like the model 32 are good too but have to be bolted to the floor or something very solid. Also different radius need different dies.

    Sent from my SM-J727P using Tapatalk
     
    RustyGold likes this.
  4. Blackout

    Blackout

    Joined:
    Jul 28, 2013
    Messages:
    334
    Location:
    Holland Mi
    Thanks for the info!! I have been researching various manufactures this will give me another option to check them out, trying to get the most bang for the buck, I have a feeling if I go with a manual bender I will regret not going with air/power assist :39:
     
  5. karfer67

    karfer67

    Joined:
    Nov 30, 2006
    Messages:
    6,200
    Location:
    sacramento, ca
    Yea it's nice having 10000 psi of power at the touch of a finger

    Sent from my SM-J727P using Tapatalk
     
    The Renaissance Man likes this.

Share This Page