Messing with my new bell.

[otroo]

How she started out.

Primer.

After sanding my base coat.

Laid some vinyl.

Lated some black and peeled.

Needs some touch up.




Sent from my SGH-T769 using Tapatalk 2

 

[18htan]

Bit of bleed under the vinyl sucks.

Love what you have done though

 

[otroo]

Yeah I will try and touch it up in the next day or to. Thanks.

Sent from my Xoom using Tapatalk 2

 

[two spot]

If you spray some clear down before you spray the top color you can some times seal the edges of the vinyl and stop the bleed. part of the prob is the compound curves on the bell though. Otherwise you have lay the top coat down super "dry" to try to prevent bleeding. Sometimes that results in orange peel texture tho. It looks cool hopefully you can touch up the edges ok.

Regards,

 

[otroo]

If you spray some clear down before you spray the top color you can some times seal the edges of the vinyl and stop the bleed. part of the prob is the compound curves on the bell though. Otherwise you have lay the top coat down super "dry" to try to prevent bleeding. Sometimes that results in orange peel texture tho. It looks cool hopefully you can touch up the edges ok.

Regards,

Yeah I did spray clear on the vinyl but did not seal it up enough.
Here are some touch up pictures.

Now I will wet sand it and lay some clear on it.

Sent from my SGH-T769 using Tapatalk 2

 

[724wd]

pinstrip it and you don't have to worry!