Huffman BareFlyte

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
May 20, 2009
Messages
7,012
Reaction score
7,127
Location
Isle of Hope, GA
Build thread:
http://www.ratrodbikes.com/forum/index.php?threads/BareFlyte.92078/

Here's my finished entry:
It's a 1948 Huffman with a Monark-based springer.
Before I forget, I'd like to thank DoubleNickle, DonOne, kingfish and No. 15 Custom Coatings of Dallas GA for making this bike possible.

I didn't talk much during the build thread, so I'll explain the build now.
For a long time, I've wanted a bare metal bike that pays homage to the Harley bobbers of the 40s.

These were my inspiration:
637db63e789d4058d0b3dfef7366a511.jpg

fca6e5657c36d76b7e40b291dbc40349.jpg

ded9cebf1a8ef9365c2d018265295955.jpg


Here's the result:
4fe62675e1549a06bb3cd7c2993a34b5.jpg


I chose this frame for the overall lines, the wide rear triangle that would fit a 24x3 tire and the beautiful brazing on it.

As for 'color', instead of paint, I chose different finishes and sheens to the metal.
I had everything sandblasted. Kept the raw metal with a satin clear powdercoat on the stem, bars, headlight bucket, crank and chainring.
I went over the frame,fork parts and the top section of the chainguard with 60 grit sandpaper to give it a 'brushed' finish, then I polished the brazing before having them all covered in gloss clear powdercoat.

There's a combination of brushed/raw/polished on the chainguard. I polished and gloss coated the headlight trim ring and the battery box.
The rear fender is 'old chrome', the springs on the fork and saddle are bright chrome.

To compliment the brazing, I brought more brass into the bike by replacing every bolt/nut (that wasn't structural or under stress) with brass units. The chainguard and fender are held on with brass screws, the chain adjusters were replaced with brass screws, there's even a brass cap nut on the seatpost and a brass lamp part used as a fender spacer to get the fender even all the way around the rear tire.

For parts:
Vintage Huffman AirFlyte headbadge.
Jiffy kickstand.
Huffman frame decal.
'slowriderz' lay back seat post.
Tires are Felt cream Thick Bricks front and rear.
Chain is a 'gold' (brass tone) YBN.
A converted tractor headlight that now houses an H4, 64 LED, automotive bulb powered by batteries tucked in the housing.
The tail light is an old miner's headlamp with a red lens added.
The seat is an Electra XL model.
The dogleg crank and chainring are Huffman units.
The wheelset is nothing special, just an old MTB rim up front and a single speed Shimano EB110 out back.
The stem is a modern short throw (needed to allow the headlight to sit tight to the bars)
The bars are old Columbia units with that cool curved crossbar.
To mimic the foot pegs on the motorcycles, what choice would I have other than a set of vintage Raleigh Bare Footin' pedals.
Grips are Thompson bottles.

The only 'doodad' is a stainless bottle opener turned rear fender brace

Hope you like it, now for an insane amount of shameless 'glamour shots' and detail photos. Enjoy, I know I will!

791f1e96916c6ae8c3eb80631e31f31b.jpg


538c5fd6aab4f66415ed97807b322288.jpg


31a4b4f6227a21610db004eed99e17bb.jpg


e874c0110dc1ecd0a3782889110702be.jpg


da5ab587319609537302dc3709510f15.jpg


e6c97fa69a0ba30ea5b5016996016034.jpg


faf65f64c0251c1dd1a945cea19f4f4a.jpg


1287bfd133acb2bc03ceb7b23db46011.jpg


fb097ba1ac7712f20bbf83bb8d8b38ec.jpg


2fe09456d7c8c9af02efede65acc0a32.jpg


a3b0a42c031d8ca2ac310b40e8edb652.jpg


c78ccc9f2f25a945573bf54b790964c9.jpg


59237e571722d93f201907cdc1ae46ec.jpg


28ebb80852a3fd076847b80d79d122bb.jpg


7ca324f88603f2a8f1c6d3f4c9cee4ee.jpg


b95dfd629603df9bb25059ebe59e9206.jpg


09600a9f5d67a7f9168953fbe90199dd.jpg


554596d4fe769e715f3255e0a148e03b.jpg


0dc21ed748ac93a406e72af68e67a6e5.jpg


61cb58147f5939c771f38ba6437c9868.jpg


106259fe364eb79bebc6535b665c9550.jpg


011b1b1813cc00e484afc11538bcb1df.jpg


1eaac36d4e127008f4376323a256e06c.jpg


9637703087327dc63ab64f52f5aaff56.jpg


Cheers!
Dr. T







Sent from my iPad using Tapatalk
 
Last edited:
Loved this build,love the bike. If I ever meet you in person and you still have this bike,I'm showing up with two wheeled Artemus.
That's a photo op in the making.
Excellent!!!!
 
Loved this build,love the bike. If I ever meet you in person and you still have this bike,I'm showing up with two wheeled Artemus.
That's a photo op in the making.
Excellent!!!!
You got that right! Thanks bro!

PS, love me some Artemus too!


Sent from my iPad using Tapatalk
 
Awesome attention to detail. I want my frame back now!!!! :D
CONGRATS!!!!! Love everything about this build!
 
Doc!! Front to back - Bottom to the top HOT!!!

Sent from my SAMSUNG-SM-N900A using Tapatalk
 
Doc, you have created a rat bike that is "fit to a tee"...Dr T that is! Awesome work on the frame and parts finishing, emulating of your inspiration models, the pedals as the kids say are "sick", and that shot of the bug eye headlight lens through the old rusty wheel is calendar worthy! Another fine build added to the stable....:113:
 
Nicely done, noticed you used the Jiffy kickstand.


Sent from my iPhone using Tapatalk
 
You have to love these old bikes,you can do so much with them.
Classic love the whole look...
 
Love me some bare metal, sweet bike
 

Latest posts

Back
Top