Hawthorne frame only

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Sep 14, 2013
Messages
7,804
Reaction score
19,343
Location
Bradley Illinoiz
Rating - 100%
10   0   0
Rattle canned burgundy
serial number 85EH on crank shell
also numbers on upper seat tube but painted over... original headbadge has holes on the side. Forward facing dropouts so probably 50's - 60's. Original fork, cap painted too...

Curious how close to the year we can get. I was told it was a '58. I did read some Snyder built had four digit serials with year reversed in the 40's so if they continued into the 50's maybe it is a '58.
2ff7dc0c27ec6883077bcef15a8e419d.jpg
6a571ffc7b722b144f497e135724b5d5.jpg
d5f379e0c70a4318430166773a10f670.jpg
1a13f6780328d6657fe8d96241b0466f.jpg
1078c2965da302b456bfb64a130c140e.jpg
58c92ecef424d235f2ea87038b049a98.jpg


Sent from the edge of an alternate universe...
 
Last edited:
Any surprise if I build a dragster in the Big Buildoff with this frame?

Carl.
 
Sure looks like a 58 model. The dropouts are mid to late 50's Snyder made. I had a 57 Rollfast I rode when I was a busboy back in the early 70's with the same frame. I ride a 42 Hawthorne now, 24EH is the serial. I've seen them up to 1955 like that, yours is the newest I've seen the reverse year.
 
Cool. Now if I can fab (or find) a tank...

Carl.

Sent from the edge of an alternate universe...
 
Now I guess I stash it in the rafters for a couple months. If there's no other commentary on it, I suppose I'll just consider it a '58 Hawthorne...

Carl.
 
the newest I've seen the reverse year.
I have seen Snyder middleweight models (65SN) with the "yoke" at the seat post cluster (just like the orange Rollfast example above).
upload_2019-2-23_19-13-2.png

Thinking that "EH" may have been for the frames built at Excelsior Michigan City Ind. plant, (already closer to Wards in Chicago); and SN may have been for the Snyder Little Falls NY plant, (closer to DP Harris in NY).
upload_2019-2-23_19-13-33.png
 
View attachment 90467

I dont have a tank but i have fenders. Sold the frame to another member a few weeks back but he didnt want the fenders.You can have em for the cost of shipping if you want them. If youre interested ill send you a better photo or two.

Thanks but I have a set if I decide to use them. That is a generous offer though. Thanks again.

Carl.
 
Nice! I’m the guy above ^ that macncheese mentioned lol.

I tried doing some research on my Hawthorne frame as well and I settled on anywhere from ‘57 to ‘59 but our frames seem pretty similar. I believe the same headbadge but I believe the red is just worn off mine.
46EA8733-FC1D-4ACB-8989-41250735B360.jpeg
Also, unless I didn’t look hard enough, the only place I found a serial number was on the drop out which reads B074696. Should I be looking elsewhere?
5350A34D-9EFC-4032-AC80-9F96A4AD343E.jpeg
 
Nice! I’m the guy above ^ that macncheese mentioned lol.

I tried doing some research on my Hawthorne frame as well and I settled on anywhere from ‘57 to ‘59 but our frames seem pretty similar. I believe the same headbadge but I believe the red is just worn off mine. View attachment 90519Also, unless I didn’t look hard enough, the only place I found a serial number was on the drop out which reads B074696. Should I be looking elsewhere?
View attachment 90518
Now I have to relook at mine to see but I don't think I have anything on my dropouts... Look on the underside of your crank housing. My '36 CWC and this '58? Snyder built, both have it on the bottom of the BB. Side note: Hawthorne badges are fairly easy to find, if you're looking for a nicer one. My older one has the holes top and bottom...

Carl.
 

Latest posts

Back
Top