Custom Frame For BoardTrack Thumper

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Feb 25, 2011
Messages
48
Reaction score
2
Location
Culver City, Ca
Rating - 0%
0   0   0
This is a bike I have been working on...just wanted to share...
http://i1092.photobucket.com/albums/i41 ... 070150.jpg[/IMG]
P8070153.jpg
P7300132.jpg
P7310146.jpg
 
A little more to share....

P8130003.jpg
P8140021.jpg
P8140016.jpg
http://i1092.

[img]http://i1092.photobucket.com/albums/i411/chevelle19681/P9090007.jpg
 
More Pictures: a brake system designed to work off the shaft of the CVT. More pics of the CVT plate design

PB180028.jpg
PB150015_02.jpg
PB150020_02.jpg
PB150018_02.jpg
 
A third bearing made for the shaft to handle the torque and brake loads. The caliper plate made and installed.
PB230059.jpg
PB230052.jpg
PC030069-1.jpg
 
Very nice work. It looks as if you aren't using any super sophisticated machinery or tools, but stuff that is hard to make top notch looking parts. Great job, you mind sharing what you use to bend the tubing? It certainly isn't that conduit bender!
 
Slick65 said:
Very nice work. It looks as if you aren't using any super sophisticated machinery or tools, but stuff that is hard to make top notch looking parts. Great job, you mind sharing what you use to bend the tubing? It certainly isn't that conduit bender!


The back section I did use a conduit bender, the rest of it was done with a hydraulic bender. It is in the back-ground of one of the pictures.

All the other tools are basic stuff...the tubing is mild steel .065 so its easy to work with.
 
Got a new set of wheels (Felt) what a difference in the look. Waiting for the 22mm carb. Need to weld the tank mounts in. Just some little odds and ends to get her run-n

PC180181.jpg
PC180187.jpg
PC180185.jpg
 
It's a rider now...since before Christmas I have put about 200 miles on the bike. It rolls hard and is a blast to ride.

P1010064_02.jpg


P1010058_02.jpg
 

Latest posts

Back
Top