Bmx Rebuild

Discussion in 'THE OTHER BIKES' started by Wooden Foot, May 29, 2011.

  1. Wooden Foot

    Wooden Foot

    0   0   0

    Joined:
    May 28, 2011
    Messages:
    22
    I bought this frame when I was 16 brand new along with the forks that are with it. It is an S&M Holmes 1996, the thing is I lost it some how for like 13 years and in January my best friend came to my house and was holding this frame in his hand and I almost passed out. So I figured I would rebuild it and share it with you guys especially if there are any bmxr's out there in rat land.

    This is what it looked like when he dropped it off.
    [​IMG]
    After I stripped it and had my buddy powder clear it.
    [​IMG]
    I made some Holmes stickers on the plotter which were more era correct.
    [​IMG]
    Another shot of my Decals.
    [​IMG]
    A little mock up...
    [​IMG]
    I ended up scrapping my decals for a re-issue Holmes sticker pack.
    [​IMG]
    My headset cap.
    [​IMG]
    Completed drive side view, complete with rusty profile cranks.
    [​IMG]
    Left side view with my ghetto rigged Fly brakes.
    [​IMG]
    Let me know if you want a part's list. let me know what you think...I have since changed the pedals and seat and I also added a pad set.
     
  2. islnder102

    islnder102

    0   0   0

    Joined:
    Oct 21, 2010
    Messages:
    214
    Location:
    Stockton, CA
    awesome rebuild...i have a 95 ELF XL frame only waiting for me to rebuild also. just curious, what does your parts list look like?
     
  3. islnder102

    islnder102

    0   0   0

    Joined:
    Oct 21, 2010
    Messages:
    214
    Location:
    Stockton, CA
    awesome rebuild...i have a 95 ELF XL frame only waiting for me to rebuild also. just curious, what does your parts list look like?
     
  4. Wooden Foot

    Wooden Foot

    0   0   0

    Joined:
    May 28, 2011
    Messages:
    22
    Frame:96 S&M Holmes
    Fork:pitch Forks
    Bars:Slam
    Stem:Dk jumpig stem
    Wheels:Sun BFR'd Bullet Proof hubs 48 hole
    Crank:profile 180mm
    Pedals:primo plastic tenderizers
    Seat:Verde pivotal
    Post:macniel pivotal
    Clamp:profile
    Sprocket:Threshold 39t
     

Share This Page