Search results

This it's totally an awesome bike. It's a 3g. I will sell you one brand new for $379. Lol Sent from my LGLS990 using Tapatalk

I'm glad it worked out. Let me know if you experience any issues with it just so i know for the future, although i don't plan on doing this again... But you never know Sent from my LGLS990 using Tapatalk

You could use something like vaseline on the surfaces you don't want painted and then spray your paint. When it dries just wash the vaseline off, and with it, the overspray Sent from my LGLS990 using Tapatalk

I've actually done this with no issues. I dropped the cups from a 1" threaded headset directly into the cups from a 1 1/8" threaded headset. They fit surprisingly well. Then just use the bearings etc. From the 1" headset and it was good to go.be sure to grease everything well and make sure you...

Looks good. Not too many stock frames will even come close to fitting those tires Sent from my LGLS990 using Tapatalk

No. 1 coat of clear for satin, 2 coats for gloss, and 3 for a lacquer finish The Ride by Golz UpCycle 5493 Carlson Dr. Sacramento, CA

The Derelict is ...... The Ride by Golz UpCycle 5493 Carlson Dr. Sacramento, CA

Okay, not sure cost of shipping yet... But we can ship. Contact me if you are interested The Ride by Golz UpCycle 5493 Carlson Dr. Sacramento, CA

This was a 20 minute paint job Some other things we've painted There will be much more to come

Hopefully I can work that out in the very near future. My deliveries come via Subaru outback and walked into the shop. They are not quite ready to start taking orders for shipment yet. They ( the US distributor) only received one pallet so far and have much more on its way on a ship somewhere. I...

Absolutely correct. (except I still use the $.99 flat black because it's flat black... Unless I am masking and want clean lines it works well) The Ride by Golz UpCycle 5493 Carlson Dr. Sacramento, CA

Okay, I can ship it by ground but it is expensive. Not sure exactly how expensive yet. It has to be shipped as an ORM-D hazardous material. I will research different carriers and find out who is least expensive. If anybody has any useful info on this please share as I have never shipped...

The brand is called spray.bike and it is from England. My wife and I are working closely with the U.S. distributor who is currently working to get up and running. Currently due to federal regulations we cannot ship, but we are working on that part. Of you are in the Sacramento area you can come...

I usually would agree with what everyone here is saying. But I'm telling you this rattle can will throw out everything you know about rattle cans Spray.bike It's from Europe and my friend is now the U.S. distributor. Seriously amazing stuff. If anybody can get it, and it's easier for those in...

Oh yeah, it goes on bare metal or a painted frame or stickers all the same. It cuts your paint time to a fraction of what it was. I painted a bike in 30 min start to finish including clear Sent from my LGLS990 using Tapatalk

I have rattle canned a lot of bikes. There are definitely some tricks to get a more durable finish, but that adds a lot of time to your job. Prep work is key. I get paint mixed in rattle cans from my l9cal auto paint store as well. Then I graduated to spraying a 2k clear that I mix through a gun...

The heat gun is a great trick. I've been doing that for a while, but now I dont have to. I have found a spray paint made for bikes that covers beautifully, dried to touch in 10 minutes, full cure in 2 hours, and delivers a durable, powder coat like finish.this stuff is unbelievable. Its a rattle...

Wish I had a sandblaster. I've heard that broken up pecan shells works best in a media blaster. I use jasco (slot like aircraft stripper but available at Lowe's), sandpaper, drywall screens, and little wire wheels that fit on my drill Sent from my LGLS990 using Tapatalk

That is freaking rad. Is that from a cars grill

The first tank I ever made. Not removable, but I like it.