B0-X----- WEENIE WAGON -----B0-X

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Holy cow you've done a ton of work in just a few days! It's looking great.
If I spend more than 4 hrs,I get a lot done. The frame is easy to make,so is the tray. Just the fiddle bits,that are a pain. Also I dont document everything,I forget to take pics.My pc takes forever to upload and write messages,have a big problem.So I post once all at the same time...
I have missed a lot of good building going on and joining in on the chatter.But I always like to see what people start with and what they end up with...
I will end up with a half built bike if I dont go out and work on it...
 
Less than 22hrs,this is tight and stressfull...
Photos will have to be a backyard shoot. Arrgggg!
 
You cane dooo eett!!!!
 
Ozzie Ozzie Ozzie. oy oy oy.
With a heap of Funkme get it done, do it right, this one is going to the wire.

But we will be back to see it.

Cause they are always worth the wait.:praise:

You have done wonders already to get this far in a country with so much going on around you that has had to limit your resources this year.:41:
 
Ok Guys it's not 100% done,but it will do.The bike is rideable,actually it cruises nicely,better with the wind behind.;)
The things I didn't get finish...(I could have but needed to get photos before dark,so pics taken at 7pm) Still have 8 hrs left,but its dark,windy,and I'm knackered.
1- I want to make 2 small doors for the front.
DSCN5081.JPG

2- Fenders paint them black with gold trim(not sure as it might take away from design)
Have the wood shaped,just need to cut,sand paint.
DSCN5067.JPG

3- Finish graphics ran out of ink/paint
DSCN5083.JPG
Paint this one on the back
k7615215.jpg

4- Some gold metal stars on the front sprocket(no paypal,so that will have to wait)
5-Mount in the gas connections
6-Make a weenie roller.
$_57.JPG


Silly things,but will look the part.
Oh and some springs in the front steering to make it less flip floppy.Noticed that on some of the older bikes they had,now I understand why.In a country with less wind no need.I will find some old bed springs somewhere.

Some things I did.
Mounted the lamps inside the lanterns.
DSCN5053.JPG
Covered the seat with some fake leather(pleather) from a old bag...DSCN5057.JPG DSCN5061.JPG
Mounted the horn,It is not in the last photos taken,as it was wet.
DSCN5216.JPG
What I had for lunch.
DSCN5066.JPG
 
Last edited:
DSCN5098.JPG
DSCN5099.JPG
DSCN5102.JPG
DSCN5137.JPG
DSCN5145.JPG
DSCN5146.JPG
DSCN5181.JPG
DSCN5183.JPG
DSCN5217.JPG
So this build started because I saw this and wanted to make one.It made me laugh and then the fun begun.
The Weenie Man made from stainless steel.he Weenie Man will show you around the wagon.
The graphics,painted on,went with the whole vintage circus theme.Made these lantern holders from flat metal,bent a hook to hold stools on.

DSCN5217.JPG
DSCN5098.JPG
The wheels with little red dice caps.
DSCN5102.JPG
The shifter is made from a dog squeaky chew toy.Filled it with builders foam.
The brake leaver is made with a old spiral knob.
DSCN5181.JPG
DSCN5145.JPG
DSCN5183.JPG
DSCN5099.JPG
Yummo.
 
Last edited by a moderator:
DSCN5114.JPG
DSCN5116.JPG
DSCN5117.JPG
DSCN5126.JPG
DSCN5141.JPG
DSCN5130.JPG
DSCN5144.JPG
DSCN5156.JPG
DSCN5191.JPG
DSCN5174.JPG
 

Attachments

  • DSCN5147.JPG
    DSCN5147.JPG
    294.2 KB · Views: 161
  • DSCN5166.JPG
    DSCN5166.JPG
    593.3 KB · Views: 165
The wind has already broken the umbrella,would have liked to have set it upside on the road,to get some interesting pics...
DSCN5198.JPG
 

Attachments

  • DSCN5101 - Copy.JPG
    DSCN5101 - Copy.JPG
    343.7 KB · Views: 172
Last edited by a moderator:
Having problems uploading.
Driving me crazy...
DSCN5212.JPG

Now it's time for a nice cold one.
 

Latest posts

Back
Top